UM10430 Datasheet, PDF (963/1164 Pages) NXP Semiconductors – LPC18xx ARM Cortex-M3 microcontroller

UM10430 NXP
Semiconductors
Table
Bit
8
907. Edge
Symbol
ETH_E
config_{01VuaralutieonLEEcDroe}e_ddervg_ggsreeeeics_ls/rldt_dpieep_eeovrt_ttneiee(o_dlE_ccndittD_n..egDG_tebeE_cittte-_micna_tod_tfhdad_eelr_lie_nEfs_ogDs_reGe0_dtEx_hg4_ee^D_r0_re^R_ni0_fg^A_e4_ib^F_sti^T_t4_tee0₈^D_vr0^R_eimn4^A_n^DC)_ut^FR_t.h^Th_sb^A_Ttei^aDFt_hb^TRp_Hed_e^ADt_Ie_L^eF₀^Rs^T_O^r_.^ADc^DFR4r^TRAi²p_AFD:t^TFRi^Ao_TADn^pDFRT_{Rv0RDApaARFDe}^e_l^TFAR_su^nTFA_e^D_e^dTDF_t^{RiTRDAxARDFTFDARTRFADTADFRTFRDATADRF}
register is 0. Detect rising edge if bit 8 in the HILO
register is 1.
9
USB0_E
Edge/level detect mode for USB0 event. The
0
corresponding bit in the EDGE register must be 0.
0
Level detect.
1
Edge detect. Detect falling edge if bit 9 in the HILO
register is 0. Detect rising edge if bit 9 in the HILO
register is 1.
10 USB1_E
Edge/level detect mode for USB1 event. The
0
corresponding bit in the EDGE register must be 0.
0
Level detect.
1
Edge detect. Detect falling edge if bit 10 in the HILO
register is 0. Detect rising edge if bit 10 in the HILO
register is 1.
11 -
-
Reserved.
12 CAN_E
Edge/level detect mode for C_CAN event. The
0
corresponding bit in the EDGE register must be 0.
0
Level detect.
1
Edge detect. Detect falling edge if bit 12 in the HILO
register is 0. Detect rising edge if bit 12 in the HILO
register is 1.
13 TIM2_E
Edge/level detect mode for combined timer output 2
0
event. The corresponding bit in the EDGE register must
be 0.
0
Level detect.
1
Edge detect. Detect falling edge if bit 13 in the HILO
register is 0. Detect rising edge if bit 13 in the HILO
register is 1.
14 TIM6_E
Edge/level detect mode for combined timer output 6
0
event. The corresponding bit in the EDGE register must
be 0.
0
Level detect.
1
Edge detect. Detect falling edge if bit 14 in the HILO
register is 0. Detect rising edge if bit 14 in the HILO
register is 1.
15 QEI_E
Edge/level detect mode for QEI interrupt signal. The
0
corresponding bit in the EDGE register must be 0.
0
Level detect.
1
Edge detect. Detect falling edge if bit 15 in the HILO
register is 0. Detect rising edge if bit 15 in the HILO
register is 1.
<Document ID>
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 00.13 — 20 July 2011
© NXP B.V. 2011. All rights reserved.
963 of 1164