UM10430 Datasheet, PDF (160/1164 Pages) NXP Semiconductors – LPC18xx ARM Cortex-M3 microcontroller

NXP Semiconductors
Table 107. Pin description …continued
Symbol
P9_0
T1 x - x -
P9_1
N6 x - x -
P9_2
N8 x - x -
P9_3
M6 x - x -
[3]
Reset
state
[2]
I; PU
UM10430 _Type
I/O
O
MGDePCsIAOcBr4iO[p1tR2ioT]n—^C—^hGaMe^pon^tte^eorr^rac1lDop^2Rnu^:t^ArrLpFo^ToPl Ps^DCeRW^1AdDM^8FiRgTx,^AixtDL^FaTROl^PADiWniFRnpT-^{ADuaDcFRtc/TRAo}toi^AFDv^nuTFRet^fTpAiDf^guDa^FRtuTRs^{DAptArRFDiaTFAnRTtF.ADiToDFRTRDAnARDFTFDARTRFADTADFRTFRDATADRF}
abort.
-
R — Function reserved.
-
R — Function reserved.
-
R — Function reserved.
I
ENET_CRS — Ethernet Carrier Sense (MII interface).
-
R — Function reserved.
I/O SSP0_SSEL — Slave Select for SSP0.
[3] _{I; PU I/O GPIO4[13] — General purpose digital input/output pin.}
O MCOA2 — Motor control PWM channel 2, output A.
-
R — Function reserved.
-
R — Function reserved.
I/O I2S0_TX_WS — Transmit Word Select. It is driven by the
master and received by the slave. Corresponds to the
signal WS in the I²S-bus specification.
I
ENET_RX_ER — Ethernet receive error (MII interface).
-
R — Function reserved.
I/O SSP0_MISO — Master In Slave Out for SSP0.
[3] _{I; PU I/O GPIO4[14] — General purpose digital input/output pin.}
O MCOB2 — Motor control PWM channel 2, output B.
-
R — Function reserved.
-
R — Function reserved.
I/O I2S0_TX_SDA — I2S transmit data. It is driven by the
transmitter and read by the receiver. Corresponds to the
signal SD in the I²S-bus specification.
I
ENET_RXD3 — Ethernet receive data 3 (MII interface).
-
R — Function reserved.
I/O SSP0_MOSI — Master Out Slave in for SSP0.
[3] _{I; PU I/O GPIO4[15] — General purpose digital input/output pin.}
O MCOA0 — Motor control PWM channel 0, output A.
O USB1_IND1 — USB1 Port indicator LED control output
1.
-
R — Function reserved.
-
R — Function reserved.
I
ENET_RXD2 — Ethernet receive data 2 (MII interface).
-
R — Function reserved.
O U3_TXD — Transmitter output for USART3.
<Document ID>
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 00.13 — 20 July 2011
© NXP B.V. 2011. All rights reserved.
160 of 1164