UM10430 Datasheet, PDF (139/1164 Pages) NXP Semiconductors – LPC18xx ARM Cortex-M3 microcontroller

NXP Semiconductors
Table 107. Pin description …continued
Symbol
P1_13
R10 x x x 60
P1_14
R11 x x x 61
P1_15
T12 x x x 62
P1_16
M7 x x x 64
[3]
Reset
state
[2]
I; PU
UM10430 _Type
I/O
O
GDUe1Ps_IOcTrX1i[pD6t]i—o—n^C_TGr^h_ae^a_nn^p_sem^tr^eai^r_tltep^1D_ru^2R_or^:p^A_u^Lo^F_tp^Ts^P_ue^DC_t^Rdf^1A_o^Dig^8F_r^Ri^TxtU^Aa^xDF_Al ^TRiR^Pn^ADpT^iFRnu1^TADt./^DcFRo^TRAou^AFDntp^TFRfTu^AiDgt^DFRp^uTRDAi^ArRFDn^aTFA.^{RTtFADiToDFRTRDAnARDFTFDARTRFADTADFRTFRDATADRF}
-
R — Function reserved.
I/O EMC_D6 — External memory data line 6.
I
T0_CAP0 — Capture input 0 of timer 0.
-
R — Function reserved.
-
R — Function reserved.
I
SD_CD — SD/MMC card detect input.
[3] _{I; PU I/O GPIO1[7] — General purpose digital input/output pin.}
I
U1_RXD — Receiver input for UART1.
-
R — Function reserved.
I/O EMC_D7 — External memory data line 7.
O T0_MAT2 — Match output 2 of timer 0.
-
R — Function reserved.
-
R — Function reserved.
-
R — Function reserved.
[3] _{I; PU I/O GPIO0[2] — General purpose digital input/output pin.}
O U2_TXD — Transmitter output for USART2.
-
R — Function reserved.
I
ENET_RXD0 — Ethernet receive data 0 (RMII/MII
interface).
O T0_MAT1 — Match output 1of timer 0.
-
R — Function reserved.
-
R — Function reserved.
-
R — Function reserved.
[3] _{I; PU I/O GPIO0[3] — General purpose digital input/output pin.}
I
U2_RXD — Receiver input for USART2.
-
R — Function reserved.
I
ENET_CRS — Ethernet Carrier Sense (MII interface).
O T0_MAT0 — Match output 0 of timer 0.
-
R — Function reserved.
-
R — Function reserved.
I
ENET_RX_DV — Ethernet Receive Data Valid (RMII/MII
interface).
<Document ID>
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 00.13 — 20 July 2011
© NXP B.V. 2011. All rights reserved.
139 of 1164