UM10430 Datasheet, PDF (177/1164 Pages) NXP Semiconductors – LPC18xx ARM Cortex-M3 microcontroller

NXP Semiconductors
Table 107. Pin description …continued
Symbol
PF_1
E11 - - - -
[3]
PF_2
D11 - - x -
[3]
PF_3
E10 - - x -
[3]
PF_4
D10 x x x 120 ^[3]
Reset
state
[2]
I; PU
I; PU
I; PU
I;IA
UM10430 _Type
-
-
RRDe——scFF^riuu^pnn^ticc^ottiiⁿoo^Cnn^hrr^aee^pssee^terrvv^ree¹dd^D..^{2R:ALFTPDCR1AD8FRTxAxDFTRPADiFRnTADDcFRTRAoAFDnTFRfTAiDgDFRuTRDAArRFDaTFARTtFADiToDFRTRDAnARDFTFDARTRFADTADFRTFRDATADRF}
I/O SSP0_SSEL — Slave Select for SSP0.
-
R — Function reserved.
I/O GPIO7[16] — General purpose digital input/output pin.
-
R — Function reserved.
-
R — Function reserved.
-
R — Function reserved.
-
R — Function reserved.
O U3_TXD — Transmitter output for USART3.
I/O SSP0_MISO — Master In Slave Out for SSP0.
-
R — Function reserved.
I/O GPIO7[17] — General purpose digital input/output pin.
-
R — Function reserved.
-
R — Function reserved.
-
R — Function reserved.
-
R — Function reserved.
I
U3_RXD — Receiver input for USART3.
I/O SSP0_MOSI — Master Out Slave in for SSP0.
-
R — Function reserved.
I/O GPIO7[18] — General purpose digital input/output pin.
-
R — Function reserved.
-
R — Function reserved.
-
R — Function reserved.
I/O SSP1_SCK — Serial clock for SSP1.
I
GP_CLKIN — General purpose clock input to the CGU.
O TRACECLK — Trace clock.
-
R — Function reserved.
-
R — Function reserved.
-
R — Function reserved.
O I2S0_TX_MCLK — I2S transmit master clock.
I/O I2S0_RX_SCK — I2S transmit clock. It is driven by the
master and received by the slave. Corresponds to the
signal SCK in the I²S-bus specification.
<Document ID>
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 00.13 — 20 July 2011
© NXP B.V. 2011. All rights reserved.
177 of 1164