MC68HC908EY16 Datasheet, PDF (241/278 Pages) Motorola, Inc – Microcontrollers

Chapter 20
Electrical Specifications
20.1 Introduction
This section contains preliminary electrical and timing specifications.
20.2 Absolute Maximum Ratings
Maximum ratings are the extreme limits to which the microcontroller unit (MCU) can be exposed without
permanently damaging it.
NOTE
This device is not guaranteed to operate properly at the maximum ratings.
Refer to 20.5 DC Electrical Characteristics for guaranteed operating
conditions.
Characteristic⁽¹⁾
Supply voltage
Input voltage
Maximum current per pin
excluding V_DD, V_SS,
and PTA0–PTA6 and PTC0-PTC1
Maximum current for pins
PTA0–PTA6 and PTC0-PTC1
Maximum current out of V_SS
Maximum current into V_DD
Storage temperature
1. Voltages referenced to V_SS
Symbol
V_DD
V_In
I
I_PTA0–I_PTA6,
I_PTC0–I_PTC1
I_MVSS
I_MVDD
T_STG
Value
Unit
–0.3 to +6.0
V
V_SS –0.3 to V_DD +0.3
V
±15
mA
±25
mA
100
mA
100
mA
–55 to +150
°C
NOTE
This device contains circuitry to protect the inputs against damage due to
high static voltages or electric fields; however, it is advised that normal
precautions be taken to avoid application of any voltage higher than
maximum-rated voltages to this high-impedance circuit. For proper
operation, it is recommended that V_In and V_Out be constrained to the range
V_SS ≤ (V_In or V_Out) ≤ V_DD. Reliability of operation is enhanced if unused
inputs are connected to an appropriate logic voltage level (for example,
either V_SS or V_DD).
MC68HC908EY16 • MC68HC908EY8 Data Sheet, Rev. 10
Freescale Semiconductor
241