PIC18F2331_07 Datasheet, PDF (313/400 Pages) Microchip Technology – 28/40/44-Pin Enhanced Flash Microcontrollers with nanoWatt Technology, High Performance PWM and A/D

PIC18F2331/2431/4331/4431
INCFSZ
Increment f, Skip if 0
Syntax:
[ label ] INCFSZ f [,d [,a]]
Operands:
0 ≤ f ≤ 255
d ∈ [0,1]
a ∈ [0,1]
Operation:
(f) + 1 → dest,
skip if result = 0
Status Affected:
None
Encoding:
0011 11da ffff ffff
Description:
The contents of register ‘f’ are
incremented. If ‘d’ is ‘0’, the result is
placed in W. If ‘d’ is ‘1’, the result is
placed back in register ‘f’. (default)
If the result is ‘0’, the next instruction,
which is already fetched, is discarded,
and a NOP is executed instead, making
it a two-cycle instruction. If ‘a’ is ‘0’, the
Access Bank will be selected,
overriding the BSR value. If ‘a’ = 1, then
the bank will be selected as per the
BSR value (default).
Words:
1
Cycles:
1(2)
Note: 3 cycles if skip and followed
by a 2-word instruction.
Q Cycle Activity:
Q1
Q2
Q3
Decode
Read
register ‘f’
Process
Data
If skip:
Q1
Q2
Q3
No
operation
No
operation
No
operation
If skip and followed by 2-word instruction:
Q1
Q2
Q3
No
operation
No
operation
No
operation
No
operation
No
operation
No
operation
Q4
Write to
destination
Q4
No
operation
Q4
No
operation
No
operation
Example:
HERE INCFSZ CNT
NZERO :
ZERO :
Before Instruction
PC
= Address (HERE)
After Instruction
CNT =
If CNT =
PC
=
If CNT ≠
PC
=
CNT + 1
0;
Address (ZERO)
0;
Address (NZERO)
INFSNZ
Increment f, Skip if Not 0
Syntax:
[ label ] INFSNZ f [,d [,a]]
Operands:
0 ≤ f ≤ 255
d ∈ [0,1]
a ∈ [0,1]
Operation:
(f) + 1 → dest,
skip if result ≠ 0
Status Affected:
None
Encoding:
0100 10da ffff ffff
Description:
The contents of register ‘f’ are
incremented. If ‘d’ is ‘0’, the result is
placed in W. If ‘d’ is ‘1’, the result is
placed back in register ‘f’ (default).
If the result is not ‘0’, the next
instruction, which is already fetched, is
discarded, and a NOP is executed
instead, making it a two-cycle
instruction. If ‘a’ is ‘0’, the Access Bank
will be selected, overriding the BSR
value. If ‘a’ = 1, then the bank will be
selected as per the BSR value (default).
Words:
1
Cycles:
1(2)
Note: 3 cycles if skip and followed
by a 2-word instruction.
Q Cycle Activity:
Q1
Q2
Q3
Decode
Read
register ‘f’
Process
Data
If skip:
Q1
Q2
Q3
No
operation
No
operation
No
operation
If skip and followed by 2-word instruction:
Q1
Q2
Q3
No
operation
No
operation
No
operation
No
operation
No
operation
No
operation
Q4
Write to
destination
Q4
No
operation
Q4
No
operation
No
operation
Example:
HERE
ZERO
NZERO
INFSNZ REG
Before Instruction
PC
= Address (HERE)
After Instruction
REG =
If REG ≠
PC
=
If REG =
PC
=
REG + 1
0;
Address (NZERO)
0;
Address (ZERO)
© 2007 Microchip Technology Inc.
Preliminary
DS39616C-page 311