English
Language : 

PIC24EP256GU810-I Datasheet, PDF (561/622 Pages) Electronic Film Capacitors, Inc. – 16-Bit Microcontrollers and Digital Signal Controllers with High-Speed PWM, USB and Advanced Analog
dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
FIGURE 32-38:
ADC CONVERSION (10-BIT MODE) TIMING CHARACTERISTICS
(CHPS<1:0> = 01, SIMSAM = 0, ASAM = 0, SSRC<2:0> = 000, SSRCG = 0)
AD50
ADCLK
Instruction
Execution
Set SAMP
SAMP
AD61
DONE
ADxIF
Clear SAMP
AD60
TSAMP
AD55
AD55
12
34 5 6
78
56
78
1 – Software sets ADx1CON1. SAMP to start sampling.
2 – Sampling starts after discharge period. TSAMP is described in
Section 16. “Analog-to-Digital Converter (ADC)” (DS70621) of the
“dsPIC33E/PIC24E Family Reference Manual”.
3 – Software clears ADxCON1. SAMP to start conversion.
4 – Sampling ends, conversion sequence starts.
5 – Convert bit 9.
6 – Convert bit 8.
7 – Convert bit 0.
8 – One TAD for end of conversion.
FIGURE 32-39:
ADC CONVERSION (10-BIT MODE) TIMING CHARACTERISTICS (CHPS<1:0> = 01,
SIMSAM = 0, ASAM = 1, SSRC<2:0> = 111, SSRCG = 0, SAMC<4:0> = 00010)
AD50
ADCLK
Instruction
Execution
Set ADON
SAMP
ADxIF
TSAMP
AD55
AD55
AD62
TSAMP
AD55
DONE
12
34
5 6734
56
8
1 – Software sets ADxCON1. ADON to start AD operation.
2 – Sampling starts after discharge period. TSAMP is described in
Section 16. “Analog-to-Digital Converter (ADC)” (DS70621)
of the “dsPIC33E/PIC24E Family Reference Manual”.
3 – Convert bit 9.
4 – Convert bit 8.
5 – Convert bit 0.
6 – One TAD for end of conversion.
7 – Begin conversion of next channel.
8 – Sample for time specified by SAMC<4:0>.
 2009-2012 Microchip Technology Inc.
DS70616G-page 561