PIC24EP256GU810-I Datasheet, PDF (177/622 Pages) Electronic Film Capacitors, Inc. – 16-Bit Microcontrollers and Digital Signal Controllers with High-Speed PWM, USB and Advanced Analog

dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
9.0 OSCILLATOR CONFIGURATION
Note 1: This data sheet summarizes the features
of the dsPIC33EPXXX(GP/MC/MU)806/
810/814 and PIC24EPXXX(GP/GU)810/
814 families of devices. It is not intended
to be a comprehensive reference source.
To complement the information in this
data sheet, refer to Section 7. “Oscil-
lator” (DS70580) of the “dsPIC33E/
PIC24E Family Reference Manual”,
which is available from the Microchip web
site (www.microchip.com).
2: Some registers and associated bits
described in this section may not be
available on all devices. Refer to
Section 4.0 “Memory Organization” in
this data sheet for device-specific register
and bit information.
The oscillator system provides:
• Four external and internal oscillator options
• Auxiliary oscillator that provides clock source to
the USB module (if available)
• On-chip Phase-Locked Loop (PLL) to boost
internal operating frequency on select internal and
external oscillator sources
• On-the-fly clock switching between various clock
sources
• Doze mode for system power savings
• Fail-Safe Clock Monitor (FSCM) that detects clock
failure and permits safe application recovery or
shutdown
• Nonvolatile Configuration bits for clock source
selection
A simplified diagram of the oscillator system is shown
in Figure 9-1.
 2009-2012 Microchip Technology Inc.
DS70616G-page 177