PIC24EP256GU810-I Datasheet, PDF (5/622 Pages) Electronic Film Capacitors, Inc. – 16-Bit Microcontrollers and Digital Signal Controllers with High-Speed PWM, USB and Advanced Analog

dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
Pin Diagrams
64-Pin QFN
= Pins are up to 5V tolerant
AN29/PMD5/RP85/RE5 1
AN30/PMD6/RPI86/RE6 2
AN31/PMD7/RP87/RE7 3
C1IN3-/SCK2/PMA5/RP118/RG6 4
C1IN1-/SDI2/PMA4/RPI119/RG7 5
C2IN3-/SDO2/PMA3/RP120/RG8 6
MCLR 7
C2IN1-/PMA2/RPI121/RG9 8
VSS 9
VDD 10
AN5/C1IN1+/RPI37/RB5 11
AN4/C1IN2-/RPI36/RB4 12
AN3/C2IN1+/RPI35/RB3 13
AN2/C2IN2-/RPI34/RB2 14
PGEC3/AN1/VREF-/RPI33/RB1 15
PGED3/AN0/VREF+/RPI32/RB0 16
dsPIC33EP512GP806
PIC24EP512GP806
48 _{PGEC2/SOSCO/C3IN1-/T1CK/RPI62/RC14}
47 _{PGED2/SOSCI/C3IN3-/RPI61/RC13}
46 INT0/RP64/RD0
45 PMCS1/RPI75/RD11
44 ASCL1/PMCS2/RPI74/RD10
43 ASDA1/RPI73/RD9
42 RTCC/RPI72/RD8
41 VSS
40 OSC2/CLKO/RC15
39 OSC1/RPI60/RC12
38 VDD
37 SCLI/RG2
36 SDA1/RG3
35 RP102/RF6
34 RP98/RF2
33 RP99/RF3
Note 1: The RPn/RPIn pins can be used by any remappable peripheral with some limitation. See
Section 11.4 “Peripheral Pin Select” for available peripherals and for information on limitations.
2: Every I/O port pin (RAx-RGx) can be used as change notification (CNAx-CNGx). See Section 11.0
“I/O Ports” for more information.
3: The availability of I²C™ interfaces varies by device. Selection (SDAx/SCLx or ASDAx/ASCLx) is
made using the device Configuration bits, ALTI2C1 and ALTI2C2 (FPOR<5:4>). See Section 29.0
“Special Features” for more information.
 2009-2012 Microchip Technology Inc.
DS70616G-page 5