|
PIC24EP256GU810-I Datasheet, PDF (1/622 Pages) Electronic Film Capacitors, Inc. – 16-Bit Microcontrollers and Digital Signal Controllers with High-Speed PWM, USB and Advanced Analog | |||
|
dsPIC33EPXXX(GP/MC/MU)806/810/814
and PIC24EPXXX(GP/GU)810/814
16-Bit Microcontrollers and Digital Signal Controllers with
High-Speed PWM, USB and Advanced Analog
Operating Conditions
⢠3.0V to 3.6V, -40ºC to +125ºC, DC to 60 MIPS
⢠3.0V to 3.6V, -40ºC to +85ºC, DC to 70 MIPS
Core: 16-Bit dsPIC33E/PIC24E CPU
⢠Code-Efficient (C and Assembly) architecture
⢠Two 40-Bit Wide Accumulators
⢠Single-Cycle (MAC/MPY) with Dual Data Fetch
⢠Single-Cycle Mixed-Sign MUL Plus Hardware Divide
⢠32-Bit Multiply Support
Clock Management
⢠2% Internal Oscillator
⢠Programmable PLLs and Oscillator Clock Sources
⢠Fail-Safe Clock Monitor (FSCM)
⢠Independent Watchdog Timer
⢠Fast Wake-up and Start-up
Power Management
⢠Low-Power Management modes (Sleep, Idle, Doze)
⢠Integrated Power-on Reset and Brown-out Reset
⢠1.0 mA/MHz Dynamic Current (typical)
⢠60 µA IPD Current (typical)
High-Speed PWM
⢠Up to Seven PWM Pairs with Independent Timing
⢠Dead Time for Rising and Falling Edges
⢠8.32 ns PWM Resolution
⢠PWM Support for:
- DC/DC, AC/DC, Inverters, PFC, Lighting
- BLDC, PMSM, ACIM, SRM
⢠Programmable Fault Inputs
⢠Flexible Trigger Configurations for ADC Conversions
Advanced Analog Features
⢠Two Independent ADC modules:
- One ADC configurable as 10-bit, 1.1 Msps with four
S&H or 12-bit, 500 ksps with one S&H
- One 10-bit ADC, 1.1 Msps with four S&H
- Eight S&H using both ADC 10-bit modules
- 24 analog channels (64-pin devices) up to 32 analog
channels (100/121/144-pin devices)
⢠Flexible and Independent ADC Trigger Sources
⢠Comparators:
- Up to three Analog Comparator modules
- Programmable references with 32 voltage points
Timers/Output Compare/Input Capture
⢠27 General Purpose Timers:
- Nine 16-bit and up to four 32-bit Timers/Counters
- 16 OC modules configurable as Timers/Counters
- Two 32-bit Quadrature Encoder Interface (QEI)
modules configurable as Timers/Counters
⢠16 IC modules
⢠Peripheral Pin Select (PPS) to allow Function Remap
⢠Real-Time Clock and Calendar (RTCC) module
Communication Interfaces
⢠USB 2.0 OTG-Compliant Full-Speed Interface
⢠Four UART modules (15 Mbps)
- Supports LIN/J2602 protocols and IrDA®
⢠Four 4-Wire SPI modules (15 Mbps)
⢠Two ECAN⢠modules (1 Mbaud) CAN 2.0B Support
⢠Two I2C modules (up to 1 Mbaud) with SMBus Support
⢠Data Converter Interface (DCI) module with Support for
I2S and Audio Codecs
⢠PPS to allow Function Remap
⢠Parallel Master Port (PMP)
⢠Programmable Cyclic Redundancy Check (CRC)
Direct Memory Access (DMA)
⢠15-Channel DMA with User-Selectable
Priority Arbitration
⢠UART, USB, SPI, ADC, ECANâ¢, IC, OC, Timers,
DCI/I2S, PMP
Input/Output
⢠Sink/Source 10 mA on All Pins
⢠5V Tolerant Pins
⢠Selectable Open-Drain, Pull-ups and Pull-Downs
⢠Up to 5 mA Overvoltage Clamp Current
⢠External Interrupts on All I/O pins
Qualification and Class B Support
⢠AEC-Q100 REVG (Grade 1 -40ºC to +125ºC) Planned
⢠AEC-Q100 REVG (Grade 0 -40ºC to +150ºC) Planned
⢠Class B Safety Library, IEC 60730
Debugger Development Support
⢠In-Circuit and In-Application Programming
⢠Five Program and Three Complex Data Breakpoints
⢠IEEE 1149.2 Compatible (JTAG) Boundary Scan
⢠Trace and Run-Time Watch
ï£ 2009-2012 Microchip Technology Inc.
DS70616G-page 1
|
▷ |