PIC24EP256GU810-I Datasheet, PDF (510/622 Pages) Electronic Film Capacitors, Inc. – 16-Bit Microcontrollers and Digital Signal Controllers with High-Speed PWM, USB and Advanced Analog

dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
TABLE 32-12: DC CHARACTERISTICS: PROGRAM MEMORY
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Param. Symbol
Characteristic
Min. Typ⁽¹⁾ Max. Units
Conditions
Program Flash Memory
D130 EP
Cell Endurance
10,000 —
— E/W -40C to +125C
D131 VPR
VDD for Read
3.0 —
3.6
V
D132b VPEW VDD for Self-Timed Write
3.0 —
3.6
V
D134 TRETD Characteristic Retention
20
—
— Year Provided no other specifications
are violated, -40C to +125C
D135 IDDP
Supply Current during
Programming
—
10
— mA
D136a TRW Row Write Time
1.32 — 1.74 ms TRW = 11064 FRC cycles,
TA = +85°C, See Note 2
D136b TRW Row Write Time
1.28 — 1.79 ms TRW = 11064 FRC cycles,
TA = +125°C, See Note 2
D137a TPE
Page Erase Time
20.1 — 26.5 ms TPE = 168517 FRC cycles,
TA = +85°C, See Note 2
D137b TPE
Page Erase Time
19.5 — 27.3 ms TPE = 168517 FRC cycles,
TA = +125°C, See Note 2
D138a TWW Word Write Cycle Time
42.3 — 55.9 µs TWW = 355 FRC cycles,
TA = +85°C, See Note 2
D138b TWW Word Write Cycle Time
41.1 — 57.6 µs TWW = 355 FRC cycles,
TA = +125°C, See Note 2
Note 1: Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.
2: Other conditions: FRC = 7.37 MHz, TUN<5:0> = 'b011111 (for Minimum), TUN<5:0> = 'b100000 (for
Maximum). This parameter depends on the FRC accuracy (see Table 32-20) and the value of the FRC
Oscillator Tuning register (see Register 9-4). For complete details on calculating the Minimum and
Maximum time, see Section 5.3 “Programming Operations”.
TABLE 32-13: INTERNAL VOLTAGE REGULATOR SPECIFICATIONS
Standard Operating Conditions (unless otherwise stated):
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Param. Symbol
Characteristics
Min. Typ Max. Units
— CEFC⁽¹⁾ External Filter Capacitor
Value
4.7
10
—
F
Note 1: Typical VCAP (CEFC) voltage = 1.8V when VDD  VDDMIN.
Comments
Capacitor must have a low
series resistance (< 1 Ohm)
DS70616G-page 510
 2009-2012 Microchip Technology Inc.