PIC24EP256GU810-I Datasheet, PDF (475/622 Pages) Electronic Film Capacitors, Inc. – 16-Bit Microcontrollers and Digital Signal Controllers with High-Speed PWM, USB and Advanced Analog

dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
REGISTER 28-5: PMSTAT: PARALLEL MASTER PORT STATUS REGISTER (SLAVE MODE ONLY)
R-0
R/W-0, HS
U-0
IBF
IBOV
—
bit 15
U-0
R-0
R-0
R-0
R-0
—
IB3F
IB2F
IB1F
IB0F
bit 8
R-1
R/W-0, HS
U-0
OBE
OBUF
—
bit 7
U-0
R-1
R-1
R-1
R-1
—
OB3E
OB2E
OB1E
OB0E
bit 0
Legend:
R = Readable bit
-n = Value at Reset
HS = Hardware Settable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
bit 14
bit 13-12
bit 11-8
bit 7
bit 6
bit 5-4
bit 3-0
IBF: Input Buffer Full Status bit
1 = All writable Input Buffer registers are full
0 = Some or all of the Writable Input Buffer registers are empty
IBOV: Input Buffer Overflow Status bit
1 = A write attempt to a full Input Byte register occurred (must be cleared in software)
0 = No overflow occurred
Unimplemented: Read as ‘0’
IB3F:IB0F: Input Buffer x Status Full bits
1 = Input buffer contains data that has not been read (reading the buffer will clear this bit)
0 = Input buffer does not contain any unread data
OBE: Output Buffer Empty Status bit
1 = All readable Output Buffer registers are empty
0 = Some or all of the readable Output Buffer registers are full
OBUF: Output Buffer Underflow Status bit
1 = A read occurred from an empty output byte register (must be cleared in software)
0 = No underflow occurred
Unimplemented: Read as ‘0’
OB3E:OB0E: Output Buffer x Status Empty bits
1 = Output buffer is empty (writing data to the buffer will clear this bit)
0 = Output buffer contains data that has not been transmitted
 2009-2012 Microchip Technology Inc.
DS70616G-page 475