PIC24EP256GU810-I Datasheet, PDF (345/622 Pages) Electronic Film Capacitors, Inc. – 16-Bit Microcontrollers and Digital Signal Controllers with High-Speed PWM, USB and Advanced Analog

dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
19.0 INTER-INTEGRATED
CIRCUIT™ (I²C™)
Note 1: This data sheet summarizes the features
of the dsPIC33EPXXX(GP/MC/MU)806/
810/814 and PIC24EPXXX(GP/GU)810/
814 families of devices. It is not intended
to be a comprehensive reference source.
To complement the information in this
data sheet, refer to Section 19. “Inter-
Integrated
Circuit™
(I²C™)”
(DS70330) of the “dsPIC33E/PIC24E
Family Reference Manual”, which is
available from the Microchip web site
(www.microchip.com).
2: Some registers and associated bits
described in this section may not be
available on all devices. Refer to
Section 4.0 “Memory Organization” in
this data sheet for device-specific register
and bit information.
The dsPIC33EPXXX(GP/MC/MU)806/810/814 and
PIC24EPXXX(GP/GU)810/814 family of devices con-
tain two Inter-Integrated Circuit (I²C) modules: I2C1
and I2C2.
The I²C module provides complete hardware support
for both Slave and Multi-Master modes of the I²C serial
communication standard, with a 16-bit interface.
The I²C module has a 2-pin interface:
• The SCLx pin is the clock.
• The SDAx pin is the data.
The I²C module offers the following key features:
• I²C interface supporting both Master and Slave
modes of operation.
• I²C Slave mode supports 7 and 10-bit addressing.
• I²C Master mode supports 7 and 10-bit addressing.
• I²C port allows bidirectional transfers between
master and slaves.
• Serial clock synchronization for I²C port can be
used as a handshake mechanism to suspend and
resume serial transfer (SCLREL control).
• I²C supports multi-master operation, detects bus
collision and arbitrates accordingly.
• IPMI support
• SMBus support
 2009-2012 Microchip Technology Inc.
DS70616G-page 345