PIC24EP256GU810-I Datasheet, PDF (499/622 Pages) Electronic Film Capacitors, Inc. – 16-Bit Microcontrollers and Digital Signal Controllers with High-Speed PWM, USB and Advanced Analog

dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
32.0 ELECTRICAL CHARACTERISTICS
This section provides an overview of dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
electrical characteristics. Additional information will be provided in future revisions of this document as it becomes
available.
Absolute maximum ratings for the dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814 family
are listed below. Exposure to these maximum rating conditions for extended periods may affect device reliability.
Functional operation of the device at these or any other conditions above the parameters indicated in the operation
listings of this specification is not implied.
Absolute Maximum Ratings
(See Note 1)
Ambient temperature under bias.............................................................................................................-40°C to +125°C
Storage temperature .............................................................................................................................. -65°C to +150°C
Voltage on VDD with respect to VSS .......................................................................................................... -0.3V to +4.0V
Voltage on any pin that is not 5V tolerant, with respect to VSS⁽³⁾.................................................... -0.3V to (VDD + 0.3V)
Voltage on any 5V tolerant pin with respect to VSS when VDD  3.0V⁽³⁾................................................... -0.3V to +5.5V
Voltage on any 5V tolerant pin with respect to Vss when VDD < 3.0V⁽³⁾..................................................... -0.3V to 3.6V
Voltage on D+ OR D- pin with respect to VUSB3V3 ................................................................... -0.3V to (VUSB3V3 +0.3V)
Voltage on VBUS with respect to VSS ........................................................................................................ -0.3V to +5.5V
Maximum current out of VSS pin ...........................................................................................................................320 mA
Maximum current into VDD pin⁽²⁾...........................................................................................................................320 mA
Maximum current sourced/sunk by any 4x I/O pin⁽⁴⁾ ..............................................................................................15 mA
Maximum current sourced/sunk by any 8x I/O pin⁽⁴⁾ ..............................................................................................25 mA
Maximum current sunk by all ports .......................................................................................................................200 mA
Maximum current sourced by all ports⁽²⁾...............................................................................................................200 mA
Note 1: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions
above those indicated in the operation listings of this specification is not implied. Exposure to maximum
rating conditions for extended periods may affect device reliability.
2: Maximum allowable current is a function of device maximum power dissipation (see Table 32-2).
3: See the “Pin Diagrams” section for the 5V tolerant pins.
4: Characterized but not tested.
 2009-2012 Microchip Technology Inc.
DS70616G-page 499