PIC24EP256GU810-I Datasheet, PDF (163/622 Pages) Electronic Film Capacitors, Inc. – 16-Bit Microcontrollers and Digital Signal Controllers with High-Speed PWM, USB and Advanced Analog

dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
REGISTER 8-1: DMAXCON: DMA CHANNEL X CONTROL REGISTER
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
U-0
U-0
CHEN
SIZE
DIR
HALF
NULLW
—
—
bit 15
U-0
—
bit 8
U-0
—
bit 7
U-0
R/W-0
R/W-0
U-0
—
AMODE<1:0>
—
U-0
R/W-0
R/W-0
—
MODE<1:0>
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
bit 14
bit 13
bit 12
bit 11
bit 10-6
bit 5-4
bit 3-2
bit 1-0
CHEN: Channel Enable bit
1 = Channel is enabled
0 = Channel is disabled
SIZE: Data Transfer Size bit
1 = Byte
0 = Word
DIR: Transfer Direction bit (source/destination bus select)
1 = Reads from DPSRAM (or RAM) address, writes to peripheral address
0 = Reads from peripheral address, writes to DPSRAM (or RAM) address
HALF: Block Transfer Interrupt Select bit
1 = Initiates interrupt when half of the data has been moved
0 = Initiates interrupt when all of the data has been moved
NULLW: Null Data Peripheral Write Mode Select bit
1 = Null data write to peripheral in addition to DPSRAM (or RAM) write (DIR bit must also be clear)
0 = Normal operation
Unimplemented: Read as ‘0’
AMODE<1:0>: DMA Channel Addressing Mode Select bits
11 = Reserved
10 = Peripheral Indirect Addressing mode
01 = Register Indirect without Post-Increment mode
00 = Register Indirect with Post-Increment mode
Unimplemented: Read as ‘0’
MODE<1:0>: DMA Channel Operating Mode Select bits
11 = One-Shot, Ping-Pong modes are enabled (one block transfer from/to each DMA buffer)
10 = Continuous, Ping-Pong modes are enabled
01 = One-Shot, Ping-Pong modes are disabled
00 = Continuous, Ping-Pong modes are disabled
 2009-2012 Microchip Technology Inc.
DS70616G-page 163