PIC24EP256GU810-I Datasheet, PDF (505/622 Pages) Electronic Film Capacitors, Inc. – 16-Bit Microcontrollers and Digital Signal Controllers with High-Speed PWM, USB and Advanced Analog

dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
TABLE 32-8: DC CHARACTERISTICS: DOZE CURRENT (IDOZE)⁽¹⁾
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Parameter
Typ.⁽²⁾
Max.
Doze
Ratio
Units
Conditions
DC73a
DC73g
DC70a
DC70g
DC71a
DC71g
DC72a
DC72g
Note 1:
2:
57
40
86
60
1:2
1:128
mA
mA
-40°C 3.3V
70 MIPS
58
41
87
62
1:2
1:128
mA
mA
+25°C 3.3V
70 MIPS
58
42
87
63
1:2
1:128
mA
mA
+85°C 3.3V
70 MIPS
53
38
80
57
1:2
1:128
mA
mA
+125°C 3.3V
60 MIPS
IDOZE is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all IDOZE measurements are as follows:
• Oscillator is configured in EC mode and external clock is active, OSC1 is driven with external square
wave from rail-to-rail with Overshoot/Undershoot < 250 mV
• CLKO is configured as an I/O input pin in the Configuration Word
• All I/O pins are configured as inputs and pulled to VSS
• MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (defined PMDx bits
are set to zero and unimplemented PMDx bits are set to one)
• CPU executing while(1) statement
• JTAG is disabled
Data in the “Typ” column is at 3.3V, +25ºC unless otherwise stated.
 2009-2012 Microchip Technology Inc.
DS70616G-page 505