PIC24EP256GU810-I Datasheet, PDF (503/622 Pages) Electronic Film Capacitors, Inc. – 16-Bit Microcontrollers and Digital Signal Controllers with High-Speed PWM, USB and Advanced Analog

dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
TABLE 32-6: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
Standard Operating Conditions: 3.0V to 3.6V
DC CHARACTERISTICS
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Param.⁽²⁾
Typ.⁽³⁾
Max.
Units
Conditions
Idle Current (IIDLE)⁽¹⁾
DC40d
6
10
mA
-40°C
DC40a
DC40b
7
12
mA
8
13
mA
+25°C
+85°C
3.3V
10 MIPS
DC40c
9
15
mA
+125°C
DC42d
11
18
mA
-40°C
DC42a
DC42b
12
20
mA
13
21
mA
+25°C
+85°C
3.3V
20 MIPS
DC42c
15
24
mA
+125°C
DC44d
23
37
mA
-40°C
DC44a
DC44b
24
39
mA
25
40
mA
+25°C
+85°C
3.3V
40 MIPS
DC44c
27
44
mA
+125°C
DC45d
34
55
mA
-40°C
DC45a
DC45b
35
56
mA
36
58
mA
+25°C
+85°C
3.3V
60 MIPS
DC45c
38
61
mA
+125°C
DC46d
39
63
mA
-40°C
DC46a
41
66
mA
+25°C
3.3V
70 MIPS
DC46b
42
68
mA
+85°C
Note 1:
2:
3:
Base IIDLE current is measured as follows:
• CPU core is off, oscillator is configured in EC mode and external clock is active, OSC1 is driven with
external square wave from rail-to-rail (EC Clock Overshoot/Undershoot < 250 mV required)
• CLKO is configured as an I/O input pin in the Configuration Word
• External Secondary Oscillator (SOSC) is disabled (i.e., SOSCO and SOSCI pins are configured as
digital I/O inputs)
• All I/O pins are configured as inputs and pulled to VSS
• MCLR = VDD, WDT and FSCM are disabled
• No peripheral modules are operating; however, every peripheral is being clocked (defined PMDx bits
are set to zero and unimplemented PMDx bits are set to one)
• The NVMSIDL bit (NVMCON<12>) = 1 (i.e., Flash regulator is set to stand-by while the device is in
Idle mode)
• JTAG is disabled
These parameters are characterized but not tested in manufacturing.
Data in “Typ” column is at 3.3V, +25ºC unless otherwise stated.
 2009-2012 Microchip Technology Inc.
DS70616G-page 503