PIC24EP256GU810-I Datasheet, PDF (555/622 Pages) Electronic Film Capacitors, Inc. – 16-Bit Microcontrollers and Digital Signal Controllers with High-Speed PWM, USB and Advanced Analog

dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
TABLE 32-53: USB OTG MODULE SPECIFICATIONS
(dsPIC33EPXXXMU8XX AND PIC24EPXXXGU8XX DEVICES ONLY)
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Param. Symbol
Characteristics⁽¹⁾
Min. Typ. Max. Units
Conditions
USB313 VUSB3V3⁽²⁾ USB Voltage
3.0
—
3.6
V Voltage on bus must be in this
range for proper USB operation
USB315 VILUSB
Input Low Voltage for USB
—
—
0.8
V
Buffer
USB316 VIHUSB
Input High Voltage for USB 2.0
—
—
V
Buffer
USB318 VDIFS
Differential Input Sensitivity —
—
0.2
V
USB319 VCM
Differential Common-Mode 0.8
—
2.5
V The difference between D+ and
Range
D- must be within this range
while VCM is met
USB320 ZOUT
Driver Output Impedance
28.0 — 44.0 
USB321 VOL
Voltage Output Low
0.0
—
0.3
V 14.25 k load connected to
3.6V
USB322 VOH
Voltage Output High
2.8
—
3.6
V 14.25 k load connected to
ground
Note 1: These parameters are characterized but not tested in manufacturing.
2: If the USB module is not being used, this pin must be connected to VDD.
 2009-2012 Microchip Technology Inc.
DS70616G-page 555