Z8FMC16100 Datasheet, PDF (289/402 Pages) Zilog, Inc. – Z8 Encore-R Motor Control Flash MCUs

Z8FMC16100 Series Flash MCU
Product Specification
267
Table 144 provides electrical characteristics and timing information for the Watch-Dog
Timer.
Table 144. Watch-Dog Timer Electrical Characteristics and Timing
Symbol Parameter
F_OSC
I_CC
Output frequency
Supply current
V_DD = 2.7–3.6V
T_A = –40ºC to 105ºC
Minimum Typical Maximum Units Conditions
5
10
15
KHz V_DD = 3.3V.
2
µA V_DD = 3.3V.
Table 145 provides electrical characteristics and timing information for the Reset and
Stop-Mode Recovery functions.
Table 145. Reset and Stop-Mode Recovery Pin Timing
Symbol Parameter
T_RESET RESET pin assertion to
initiate a System Reset.
T_SMR Stop-Mode Recovery pin
pulse rejection period
T_A = –40ºC to 105ºC
Minimum Typical Maximum Units Conditions
4
—
—
T_CLK Not in STOP mode.
T_CLK = System Clock
period.
10
20
40
ns RESET, DBG, and GPIO
pins configured as SMR
sources.
Table 146 provides electrical characteristics and timing information for the Analog-to-
Digital Converter and illustrates the input frequency response of the ADC.
Table 146. Analog-to-Digital Converter Electrical Characteristics and Timing
Symbol Parameter
Resolution
Throughput conversion
ADCCLK frequency
DNL
Differential nonlinearity
for 8-bit use
INL
Integral nonlinearity
for 8-bit use
T_A = –40ºC to 105ºC
Minimum Typical Maximum Units Conditions
10
—
13
bits External V_REF = 2.0V.
CLKs ADC clock cycles.
20
MHz
–0.99
1.25 LSB 20 MHz sys clock with
ADC clock divided by 4
–1.25
1.25 LSB 20 MHz sys clock with
ADC clock divided by 4
PS024604-1005
PRELIMINARY
On-Chip Peripheral AC and DC Electrical