Z8FMC16100 Datasheet, PDF (226/402 Pages) Zilog, Inc. – Z8 Encore-R Motor Control Flash MCUs

Z8 Encore!^® Motor Control Flash MCUs
Product Specification
204
[2:0]
Analog Input Select
ANAIN
000
ANA0 input is selected for analog to digital conversion.
001
ANA1 input is selected for analog to digital conversion.
010
ANA2 input is selected for analog to digital conversion.
011
ANA3 input is selected for analog to digital conversion.
100
ANA4 input is selected for analog to digital conversion.
101
ANA5 input is selected for analog to digital conversion.
110
ANA6 input is selected for analog to digital conversion.
111
ANA7 input is selected for analog to digital conversion.
ADC Raw Data High Byte Register
The ADC Data Raw High Byte Register, shown in Table 105, contains the upper eight bits
of raw data from the ADC output. Access to the ADC Raw Data High Byte register is
Read-Only. This register is used for test only.
Table 105. ADC Raw Data High Byte Register (ADCRD_H)
BITS
7
6
5
4
3
2
1
0
FIELD
ADCRDH
RESET
X
R/W
R
ADDR
F71H
Bit
Position
[7:0]
Value
(H)
Description
00H–FFH ADC Raw Data High Byte
The data in this register is the raw data coming from the SAR Block. It will change
as the conversion is in progress. This register is used for testing only.
ADC Data High Byte Register
The ADC Data High Byte Register, shown in Table 106, contains the upper eight bits of
the ADC output. Access to the ADC Data High Byte Register is Read-Only. Reading the
ADC Data High Byte Register latches data in the ADC Low Bits Register.
Analog-to-Digital Converter
PRELIMINARY
PS024604-1005