Z8FMC16100 Datasheet, PDF (167/402 Pages) Zilog, Inc. – Z8 Encore-R Motor Control Flash MCUs

Z8FMC16100 Series Flash MCU
Product Specification
145
Infrared Encoder/Decoder
The Z8FMC16100 Series Flash MCU contains two fully-functional, high-performance
UART to Infrared Encoder/Decoders (endecs). Each infrared endec is integrated with an
on-chip UART to allow easy communication between the Z8FMC16100 Series Flash
MCU and IrDA Physical Layer Specification, Version 1.3-compliant infrared transceivers.
Infrared communication provides secure, reliable, low-cost, point-to-point communication
between PCs, PDAs, cell phones, printers and other infrared enabled devices.
Architecture
Figure 19 illustrates the architecture of the infrared endec.
System
Clock
UART
RxD
TxD
Baud Rate
Clock
Infrared
Encoder/Decoder
(endec)
RxD
TxD
ZiLOG
ZHX1810
RxD
TxD
Infrared
Transceiver
Interrupt I/O
Data
Signal Address
Figure 19. Infrared Data Communication System Block Diagram
Operation
When the infrared endec is enabled, the transmit data from the associated on-chip UART
is encoded as digital signals in accordance with the IrDA standard and output to the infra-
red transceiver using the TXD pin. Likewise, data received from the infrared transceiver is
passed to the infrared endec using the RXD pin, decoded by the infrared endec, and passed
PS024604-1005
PRELIMINARY
Architecture