HD6413002 Datasheet, PDF (121/700 Pages) Renesas Technology Corp – High-performance single-chip microcontroller

6.2 Register Descriptions
6.2.1 Bus Width Control Register (ABWCR)
ABWCR is an 8-bit readable/writable register that selects 8-bit or 16-bit access for each area.
Bit
7
ABW7
Initial ^{Modes 1, 3 1}
value _{Modes 2, 4 0}
Read/Write
R/W
6
ABW6
1
0
R/W
5
ABW5
1
0
R/W
4
ABW4
1
0
R/W
3
ABW3
1
0
R/W
2
ABW2
1
0
R/W
1
ABW1
1
0
R/W
0
ABW0
1
0
R/W
Bits selecting bus width for each area
When ABWCR contains H'FF (selecting 8-bit access for all areas), the H8/3002 operates in 8-bit
bus mode: the upper data bus (D₁₅ to D₈) is valid, and port 4 is an input/output port. When at least
one bit is cleared to 0 in ABWCR, the H8/3002 operates in 16-bit bus mode with a 16-bit data bus
(D₁₅ to D₀). In modes 1 and 3, ABWCR is initialized to H'FF by a reset and in hardware standby
mode. In modes 2 and 4, ABWCR is initialized to H'00 by a reset and in hardware standby mode.
ABWCR is not initialized in software standby mode.
Bits 7 to 0—Area 7 to 0 Bus Width Control (ABW7 to ABW0): These bits select 8-bit access
or 16-bit access to the corresponding address areas.
Bits 7 to 0
ABW7 to ABW0
0
1
Description
Areas 7 to 0 are 16-bit access areas
Areas 7 to 0 are 8-bit access areas
ABWCR specifies the bus width of external memory areas. The bus width of on-chip memory and
registers is fixed and does not depend on ABWCR settings.
106