M1A3P1000-1PQ208M Datasheet, PDF (79/212 Pages) Microsemi Corporation – Military ProASIC3/EL Low Power Flash FPGAs with Flash*Freeze Technology

Military ProASIC3/EL Low Power Flash FPGAs
Timing Characteristics
1.2 V DC Core Voltage
Table 2-97 • 1.5 V LVCMOS Low Slew
Military-Case Conditions: T_J = 125°C, Worst-Case VCC = 1.14 V, Worst-Case VCCI = 1.4 V
Applicable to Pro I/Os for A3PE600L and A3PE3000L Only
Drive
Strength
2 mA
Speed
Grade
Std.
t_DOUT
0.80
t_DP
9.53
t_DIN
0.05
t_PY
2.19
t_PYS
3.06
t_EOUT
0.52
t_ZL
9.69
t_ZH
7.88
t_LZ
3.38
t_HZ
2.67
t_ZLS
11.90
t_ZHS
10.09
Units
ns
–1 0.68 8.10 0.05 1.86 2.61 0.44 8.25 6.71 2.87 2.27 10.12 8.58 ns
4 mA
Std. 0.80 8.14 0.05 2.19 3.06 0.52 8.28 6.89 3.74 3.34 10.49 9.09 ns
–1 0.68 6.93 0.05 1.86 2.61 0.44 7.05 5.86 3.18 2.84 8.92 7.74 ns
6 mA
Std. 0.80 7.64 0.05 2.19 3.06 0.52 7.78 6.70 3.82 3.52 9.98 8.91 ns
–1 0.68 6.50 0.05 1.86 2.61 0.44 6.61 5.70 3.25 2.99 8.49 7.58 ns
8 mA
Std. 0.80 7.55 0.05 2.19 3.06 0.52 7.68 6.71 3.41 4.19 9.88 8.91 ns
–1 0.68 6.42 0.05 1.86 2.61 0.44 6.53 5.71 2.90 3.56 8.41 7.58 ns
12 mA
Std. 0.80 7.55 0.05 2.19 3.06 0.52 7.68 6.71 3.41 4.19 9.88 8.91 ns
–1 0.68 6.42 0.05 1.86 2.61 0.44 6.53 5.71 2.90 3.56 8.41 7.58 ns
Note: For specific junction temperature and voltage supply levels, refer to Table 2-5 on page 2-8 for derating values.
Table 2-98 • 1.5 V LVCMOS High Slew
Military-Case Conditions: T_J = 125°C, Worst-Case VCC = 1.14 V, Worst-Case VCCI = 1.4 V
Applicable to Pro I/Os for A3PE600L and A3PE3000L Only
Drive
Strength
2 mA
Speed
Grade
Std.
t_DOUT
0.80
t_DP
3.91
t_DIN
0.05
t_PY
2.19
t_PYS
3.06
t_EOUT
0.52
t_ZL
3.98
t_ZH
3.54
t_LZ
3.37
t_HZ
2.78
t_ZLS
6.18
t_ZHS Units
5.75 ns
–1 0.68 3.33 0.05 1.86 2.61 0.44 3.38 3.01 2.86 2.36 5.26 4.89 ns
4 mA
Std. 0.80 3.34 0.05 2.19 3.06 0.52 3.39 2.90 3.73 3.45 5.60 5.11 ns
–1 0.68 2.84 0.05 1.86 2.61 0.44 2.88 2.47 3.17 2.93 4.76 4.35 ns
6 mA
Std. 0.80 3.23 0.05 2.19 3.06 0.52 3.28 2.78 3.81 3.64 5.48 4.99 ns
–1 0.68 2.74 0.05 1.86 2.61 0.44 2.79 2.37 3.24 3.09 4.66 4.24 ns
8 mA
Std. 0.80 3.19 0.05 2.19 3.06 0.52 3.24 2.63 3.93 4.33 5.45 4.84 ns
–1 0.68 2.71 0.05 1.86 2.61 0.44 2.76 2.24 3.34 3.69 4.63 4.12 ns
12 mA
Std. 0.80 3.19 0.05 2.19 3.06 0.52 3.24 2.63 3.93 4.33 5.45 4.84 ns
–1 0.68 2.71 0.05 1.86 2.61 0.44 2.76 2.24 3.34 3.69 4.63 4.12 ns
Notes:
1. Software default selection highlighted in gray.
2. For specific junction temperature and voltage supply levels, refer to Table 2-5 on page 2-8 for derating values.
Revision 3
2- 65