M1A3P1000-1PQ208M Datasheet, PDF (24/212 Pages) Microsemi Corporation – Military ProASIC3/EL Low Power Flash FPGAs with Flash*Freeze Technology

Military ProASIC3/EL DC and Switching Characteristics
Table 2-11 • Quiescent Supply Current (IDD), Static Mode and Active Mode ¹
Core Voltage
A3PE600L
ICCA Current²
Nominal (25°C)
1.2 V
0.55
1.5 V
0.83
Typical maximum (25°C)
1.2 V
9
1.5 V
12
Military maximum (125°C)
1.2 V
65
1.5 V
85
ICCI or IJTAG Current³
VCCI / VJTAG = 1.2 V (per bank)
Typical (25°C)
1.2 V
1.7
VCCI / VJTAG = 1.5 V (per bank)
Typical (25°C)
1.2 V / 1.5 V
1.8
VCCI / VJTAG = 1.8 V (per bank)
Typical (25°C)
1.2 V / 1.5 V
1.9
VCCI / VJTAG = 2.5 V (per bank)
Typical (25°C)
1.2 V / 1.5 V
2.2
VCCI / VJTAG = 3.3 V (per bank)
Typical (25°C)
1.2 V / 1.5 V
2.5
Notes:
1. IDD = N_BANKS × ICCI + ICCA. JTAG counts as one bank when powered.
2. Includes VCC , VCCPLL, and VPUMP currents.
3. Values do not include I/O static contribution (PDC6 and PDC7).
A3PE3000L
Units
2.75
mA
4.2
mA
17
mA
20
mA
165
mA
185
mA
1.7
µA
1.8
µA
1.9
µA
2.2
µA
2.5
µA
Table 2-12 • Quiescent Supply Current (IDD) Characteristics for A3P250 and A3P1000
Core Voltage
A3P250
A3P1000
Units
Nominal (25°C)
1.5 V
3
8
mA
Typical maximum (25°C)
1.5 V
15
30
mA
Military maximum (125°C)
1.5 V
65
150
mA
Note: IDD includes VCC , VPUMP, VCCI, and VMV currents. Values do not include I/O static contribution (PDC6 and PDC7),
which is shown in Table 2-21 on page 2-16.
2-10
Revision 3