|
M1A3P1000-1PQ208M Datasheet, PDF (58/212 Pages) Microsemi Corporation – Military ProASIC3/EL Low Power Flash FPGAs with Flash*Freeze Technology | |||
|
◁ |
Military ProASIC3/EL DC and Switching Characteristics
Table 2-55 ⢠3.3 V LVTTL / 3.3 V LVCMOS Low Slew
Military-Case Conditions: TJ = 125°C, Worst-Case VCC = 1.425 V, Worst-Case VCCI = 3.0 V
Applicable to Standard Plus I/O Banks
Drive
Strength
4 mA
Speed
Grade
Std.
tDOUT
0.63
tDP
5.64
tDIN
0.05
tPY
1.10
tEOUT
0.45
tZL
5.74
tZH
4.78
tLZ
2.50
tHZ
2.43
tZLS
8.20
tZHS
7.24
Units
ns
â1
0.54 4.79 0.04 0.94 0.39 4.88 4.06 2.13 2.07 6.98 6.16 ns
6 mA
Std. 0.63 4.64 0.05 1.10 0.45 4.73 4.16 2.84 3.01 7.19 6.62 ns
â1
0.54 3.95 0.04 0.94 0.39 4.02 3.54 2.42 2.56 6.11 5.63 ns
8 mA
Std. 0.63 4.64 0.05 1.10 0.45 4.73 4.16 2.84 3.01 7.19 6.62 ns
â1
0.54 3.95 0.04 0.94 0.39 4.02 3.54 2.42 2.56 6.11 5.63 ns
12 mA
Std. 0.63 3.94 0.05 1.10 0.45 4.01 3.67 3.07 3.39 6.47 6.13 ns
â1
0.54 3.35 0.04 0.94 0.39 3.41 3.12 2.61 2.88 5.51 5.21 ns
16 mA
Std. 0.63 3.94 0.05 1.10 0.45 4.01 3.67 3.07 3.39 6.47 6.13 ns
â1
0.54 3.35 0.04 0.94 0.39 3.41 3.12 2.61 2.88 5.51 5.21 ns
Note: For specific junction temperature and voltage supply levels, refer to Table 2-6 on page 2-8 for derating values.
Table 2-56 ⢠3.3 V LVTTL / 3.3 V LVCMOS High Slew
Military-Case Conditions: TJ = 125°C, Worst-Case VCC = 1.425 V, Worst-Case VCCI = 3.0 V
Applicable to Standard Plus I/O Banks
Drive
Strength
4 mA
Speed
Grade
Std.
tDOUT
0.63
tDP
3.07
tDIN
0.05
tPY
1.10
tEOUT
0.45
tZL
3.13
tZH
2.46
tLZ
2.50
tHZ
2.57
tZLS
5.59
tZHS
4.91
Units
ns
â1
0.54 2.61 0.04 0.94 0.39 2.66 2.09 2.13 2.19 4.75 4.18 ns
6 mA
Std. 0.63 2.51 0.05 1.10 0.45 2.55 1.97 2.84 3.16 5.01 4.43 ns
â1
0.54 2.13 0.04 0.94 0.39 2.17 1.67 2.41 2.69 4.26 3.76 ns
8 mA
Std. 0.63 2.51 0.05 1.10 0.45 2.55 1.97 2.84 3.16 5.01 4.43 ns
â1
0.54 2.13 0.04 0.94 0.39 2.17 1.67 2.41 2.69 4.26 3.76 ns
12 mA
Std. 0.63 2.24 0.05 1.10 0.45 2.28 1.72 3.07 3.54 4.74 4.18 ns
â1
0.54 1.90 0.04 0.94 0.39 1.94 1.47 2.61 3.01 4.03 3.56 ns
16 mA
Std. 0.63 2.24 0.05 1.10 0.45 2.28 1.72 3.07 3.54 4.74 4.18 ns
â1
0.54 1.90 0.04 0.94 0.39 1.94 1.47 2.61 3.01 4.03 3.56 ns
Notes:
1. Software default selection highlighted in gray.
2. For specific junction temperature and voltage supply levels, refer to Table 2-6 on page 2-8 for derating values.
2-44
Revision 3
|
▷ |