M1A3P1000-1PQ208M Datasheet, PDF (53/212 Pages) Microsemi Corporation – Military ProASIC3/EL Low Power Flash FPGAs with Flash*Freeze Technology

Military ProASIC3/EL Low Power Flash FPGAs
Single-Ended I/O Characteristics
3.3 V LVTTL / 3.3 V LVCMOS
Low-Voltage Transistor–Transistor Logic (LVTTL) is a general-purpose standard (EIA/JESD) for 3.3 V
applications. It uses an LVTTL input buffer and push-pull output buffer.
Table 2-45 • Minimum and Maximum DC Input and Output Levels
Applicable to Pro I/Os for A3PE600L and A3PE3000L Only
3.3 V LVTTL /
3.3 V LVCMOS
VIL
VIH
VOL VOH IOL IOH IOSL
IOSH IIL¹ IIH²
Min.
Drive Strength V
Max.
V
Min.
V
Max.
V
Max.
V
Min.
V mA mA
Max.
mA³
Max.
mA³
µA⁴ µA⁴
4 mA
–0.3 0.8
2
3.6
0.4
2.4 4 4
25
27
15 15
8 mA
–0.3 0.8
2
3.6
0.4
2.4 8 8
51
54
15 15
12 mA
–0.3 0.8
2
3.6
0.4
2.4 12 12
103
109
15 15
16 mA
–0.3 0.8
2
3.6
0.4
2.4 16 16
132
127
15 15
24 mA
–0.3 0.8
2
3.6
0.4
2.4 24 24
268
181
15 15
Notes:
1. I_IL is the input leakage current per I/O pin over recommended operation conditions where –0.3V < VIN < VIL.
2. I_IH is the input leakage current per I/O pin over recommended operating conditions VIH < VIN < VCCI. Input current is
larger when operating outside.
3. Currents are measured at 100°C junction temperature and maximum voltage.
4. Currents are measured at 125°C junction temperature.
5. Software default selection highlighted in gray.
Table 2-46 • Minimum and Maximum DC Input and Output Levels
Applicable to Advanced I/O Banks for A3P250 and A3P1000 Only
3.3 V LVTTL /
3.3 V LVCMOS
Drive Strength
VIL
Min.
V
Max.
V
VIH
Min.
V
Max.
V
VOL
Max.
V
VOH IOL IOH
Min.
V mA mA
IOSL
Max.
mA³
I_OSH
Max.
mA³
I_IL1 I_IH2
µA⁴ µA⁴
2 mA
–0.3 0.8
2
3.6
0.4
2.4 2 2
25
27
15 15
4 mA
–0.3 0.8
2
3.6
0.4
2.4 4 4
25
27
15 15
6 mA
–0.3 0.8
2
3.6
0.4
2.4 6 6
51
54
15 15
8 mA
–0.3 0.8
2
3.6
0.4
2.4 8 8
51
54
15 15
12 mA
–0.3 0.8
2
3.6
0.4
2.4 12 12
103
109
15 15
16 mA
–0.3 0.8
2
3.6
0.4
2.4 16 16
132
127
15 15
24 mA
–0.3 0.8
2
3.6
0.4
2.4 24 24
268
181
15 15
Notes:
1. IIL is the input leakage current per I/O pin over recommended operation conditions where –0.3V < VIN < VIL.
2. IIH is the input leakage current per I/O pin over recommended operating conditions VIH < VIN < VCCI. Input current is
larger when operating outside.
3. Currents are measured at 100°C junction temperature and maximum voltage.
4. Currents are measured at 125°C junction temperature.
5. Software default selection highlighted in gray.
Revision 3
2- 39