|
MC9S12NE64CPVE Datasheet, PDF (235/554 Pages) Freescale Semiconductor, Inc – MC9S12NE64 Device Overview | |||
|
◁ |
Memory Map and Register Deï¬nition
NOTE
If only SCIBDH is written to, a read will not return the correct data until
SCIBDL is written to as well, following a write to SCIBDH.
Write: anytime
The SCI baud rate register is used to determine the baud rate of the SCI and to control the infrared
modulation/demodulation submodule.
Table 8-3. IRSCI Transmit Pulse Width
TNP[1:0]
11
10
01
00
Narrow Pulse Width
Reserved
1/32
1/16
3/16
8.3.2.2
NOTE
The baud rate generator is disabled after reset and not started until the TE
bit or the RE bit is set for the ï¬rst time. The baud rate generator is disabled
when (SBR[12:0] = 0 and IREN = 0) or (SBR[12:1] = 0 and IREN = 1).
Writing to SCIBDH has no effect without writing to SCIBDL, because
writing to SCIBDH puts the data in a temporary location until SCIBDL is
written to.
SCI Control Register 1 (SCICR1)
7
6
5
4
3
2
1
0
R
LOOPS
SCISWAI
RSRC
M
WAKE
ILT
PE
PT
W
Reset
0
0
0
0
0
0
0
0
Figure 8-5. SCI Control Register 1 (SCICR1)
Read: anytime
Write: anytime
MC9S12NE64 Data Sheet, Rev. 1.1
Freescale Semiconductor
235
|
▷ |