W90P710CD Datasheet, PDF (334/552 Pages) Winbond – 32-BIT ARM7TDMI-BASED MCU

W90P710CD/W90P710CDG
BITS
[31:3]
[2:0]
DESCRIPTIONS
Reserved _-
UBCR
UBCR is a 3 bits register which is used to select clock source to
generate suitable baud rate:
000: 15Mhz from external crystal
100: 30Mhz divided from PLL 480Mhz
101: 43.6Mhz divided from PLL 480Mhz
110: 48Mhz divided from PLL 480Mhz
111: 60Mhz divided from PLL 480Mhz
6.12.3 UART2
UART2 contains 2 features: general UART and IrDA SIR decoder/encoder. UART has not modem
function. Please read the spec of section 7.12.5 General UART controller function description. The
IrDA SIR is described as follow:
Table 6.12.3.1 UART2 Register Map
Register
Address
R/W Other condition
Reset value
UART2_RBR
0xFFF8_0200
R
DLAB=0
Undefined
UART2_THR
0xFFF8_0200
W
DLAB=0
Undefined
UART2_IER
0xFFF8_0204
R/W
DLAB=0
0x0000_0000
UART2_DLL
0xFFF8_0200
R/W
DLAB=1
0x0000_0000
UART2_DLM
0xFFF8_0204
R/W
DLAB=1
0x0000_0000
UART2_IIR
0xFFF8_0208
R
0x8181_8181
UART2_FCR
0xFFF8_0208
W
Undefined
UART2_LCR
0xFFF8_020c
R/W
0x0000_0000
Reserved
0xFFF8_0210
Undefined
UART2_LSR
0xFFF8_0214
R
0x6060_6060
Reserved
0xFFF8_0218
Undefined
UART2_TOR
0xFFF8_021c
R/W
0x0000_0000
UART2_IRCR
0xFFF8_0220
R/W
0x0000_0040
UART2 IrDA Control Register (UART2_IRCR)
REGISTER ADDRESS R/W
DESCRIPTION
UART2_IRCR 0xFFF8_0220 R/W UART 2 IrDA Control Register
- 334 -
RESET VALUE
0x0000_0040