W90P710CD Datasheet, PDF (249/552 Pages) Winbond – 32-BIT ARM7TDMI-BASED MCU

W90P710CD/W90P710CDG
Continued.
BITS
[2]
CD_IS
[1]
DO_IS
[0]
DI_IS
DESCRIPTIONS
CD# Interrupt Status
0=No Interrupt Generated
1=Interrupt Generated
Note: Write “1” into this bit will clear the interrupt status.
Data Output Interrupt Status
0=No Interrupt Generated
1=Interrupt Generated
Note: Write “1” into this bit will clear the interrupt status.
Data Input Interrupt Status
0=No Interrupt Generated
1=Interrupt Generated
Note: Write “1” into this bit will clear the interrupt status.
SD Command Argument Register (SDAUG)
REGISTER ADDRESS
SDARG 0xFFF0_7310
R/W
DESCRIPTION
R/W SD Command Argument Register
31
30
29
28
27
26
SD_CMD_ARG
23
22
21
20
19
18
SD_CMD_ARG
15
14
13
12
11
10
SD_CMD_ARG
7
6
5
4
3
2
SD_CMD_ARG
RESET VALUE
0x0000_0000
25
24
17
16
9
8
1
0
BITS
[31:0]
DESCRIPTIONS
SD_CMD_ARG
SD Command Argument
This register contains a 32-bit value specifies the argument of SD
command from host controller to card.
Publication Release Date: September 19, 2006
- 249 -
Revision B2