W90P710CD Datasheet, PDF (257/552 Pages) Winbond – 32-BIT ARM7TDMI-BASED MCU

W90P710CD/W90P710CDG
Continued
BITS
DESCRIPTIONS
Monochrome LCD has an 8-bit interface
[23] LCDMON8 0 = mono LCD use 4-bit interface
1 = mono LCD use 8-bit interface
STN LCD is monochrome
[22] LCDBW 0 = STN LCD is color
1 = STN LCD is monochrome
Image stored in memory device is YUV format or RGB format
[21]
YUV_nRGB
0 = RGB format
1 = YUV format
If this bit is set to 1, VDBPP and OSDBPP must be set to 101 ( 16bpp )
External TV encoder Enable
[20]
TVEN 0 = Normal operation
1 = Convert RGB to YCbCr for external TV encoder
[19:18]
PIXELSEQ
Display pixel sequence for sync-type TFT
00 = R1 G1 B2 R2 G3 R3
01 = R1 G2 B3 R4 G5 B6
10 = R1 G1 B1 R2 G2 B2
11 = Reserved
TFT Type Select
[17] TFTTYPE _{0 = Sync-type High Color TFT LCD}
1 = Sync-type TFT LCD
LCD is TFT
[16] LCDTFT ^{0 = LCD is an STN display}
1 = LCD is a TFT display
[15:14] Reserved Reserved
[13:12]
YUV_SEQ
YUV output sequence( only used at TV-Encoder)
00 = UYVY
01 = YUYV
10 = VYUY
11 = YVYU
[11:10]
RGBSEQ
LCD Line Data Sequence( only used at Sync-Type non High Color TFT)
00 = First line data is RGB, second line data is GBR
01 = First line data is BGR, second line data is RBG
10 = First line data is GBR, second line data is RGB
11 = First line data is RBG, second line data is BGR
Publication Release Date: September 19, 2006
- 257 -
Revision B2