MC68HC912DG128 Datasheet, PDF (84/452 Pages) Motorola, Inc – Microcontrollers

Operating Modes
Freescale Semiconductor, Inc.
INITRM — Initialization of Internal RAM Position Register
$0010
Bit 7
6
5
4
3
2
1
Bit 0
RAM15 RAM14 RAM13
0
0
0
0
0
RESET:
0
0
1
0
0
0
0
0
RAM[15:13] — Internal RAM map position
These bits specify the upper three bits of the 16-bit RAM address.
Normal modes: write once; special modes: write anytime. Read
anytime.
5.5.3 EEPROM Mapping
The MC68HC912DG128 has 2K bytes of EEPROM which is activated by
the EEON bit in the INITEE register. Mapping of internal EEPROM is
controlled by four bits in the INITEE register. After reset EEPROM
address space begins at location $0800 but can be mapped to any 4K
byte boundary within the standard 64K byte address space. The
EEPROM block occupies the last 2K bytes of the 4K byte block.
INITEE— Initialization of Internal EEPROM Position Register
$0012
Bit 7
6
5
4
3
2
1
Bit 0
EE15
EE14
EE13
EE12
0
0
0
EEON
RESET:
0
0
0
0
0
0
0
1
EE[15:12] — Internal EEPROM map position
These bits specify the upper four bits of the 16-bit EEPROM address.
Normal modes: write once; special modes: write anytime. Read
anytime.
EEON — internal EEPROM On (Enabled)
This bit is forced to one in single-chip modes.
Read or write anytime.
0 = Removes the EEPROM from the map.
1 = Places the on-chip EEPROM in the memory map at the address
selected by EE[15:12].
Technical Data
84
MC68HC912DG128 — Rev 3.0
Operating Modes
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA