MC68HC912DG128 Datasheet, PDF (375/452 Pages) Motorola, Inc – Microcontrollers

Freescale Semiconductor, Inc.
Development Support
Breakpoints
18.5 Breakpoints
Hardware breakpoints are used to debug software on the
MC68HC912DG128 by comparing actual address and data values to
predetermined data in setup registers. A successful comparison will
place the CPU in background debug mode (BDM) or initiate a software
interrupt (SWI). Breakpoint features designed into the
MC68HC912DG128 include:
• Mode selection for BDM or SWI generation
• Program fetch tagging for cycle of execution breakpoint
• Second address compare in dual address modes
• Range compare by disable of low byte address
• Data compare in full feature mode for non-tagged breakpoint
• Byte masking for high/low byte data compares
• R/W compare for non-tagged compares
• Tag inhibit on BDM TRACE
18.5.1 Breakpoint Modes
Three modes of operation determine the type of breakpoint in effect.
• Dual address-only breakpoints, each of which will cause a
software interrupt (SWI)
• Single full-feature breakpoint which will cause the part to enter
background debug mode (BDM)
• Dual address-only breakpoints, each of which will cause the part
to enter BDM
Breakpoints will not occur when BDM is active.
MC68HC912DG128 — Rev 3.0
MOTOROLA
Development Support
For More Information On This Product,
Go to: www.freescale.com
Technical Data
375