TLK10031 Datasheet, PDF (94/146 Pages) Texas Instruments – TLK10031 Single-Channel XAUI/10GBASE-KR Transceiver

TLK10031
SLLSEL3A – JULY 2015 – REVISED AUGUST 2015
www.ti.com
7.5.3.7 PMA_DEV_PACKAGE_2 (register = 0x0006) (default = 0x4000) (device address: 0x01)
Figure 7-94. PMA_DEV_PACKAGE_2 Register
15
14
13
12
11
10
9
8
VS_DEV2_
PRESENT
(RX)
VS_DEV1_
PRESENT
(RX)
RESERVED
RO
RO
RO
7
6
5
4
3
2
1
0
RESERVED
RO
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Bit Field
15 VS_DEV2_PRESENT
(RX)
14 VS_DEV1_PRESENT
(RX)
13:0 RESERVED
Table 7-76. PMA_DEV_PACKAGE_2 Field Descriptions
Type
RO
RO
Reset
Description
Always reads 0.
1 = Vendor specific device 2 present in the package
0 = Vendor specific device 2 not present in the package
Always reads 1.
1 = Vendor specific device 1 present in the package
0 = Vendor specific device 1 not present in the package
For TI use only.
7.5.3.8 PMA_DEV_PACKAGE_2 (register = 0x0006) (default = 0x4000) (device address: 0x01)
Figure 7-95. PMA_DEV_PACKAGE_2 Register
15
14
DEV_PRESENT
(RX)
RO
13
TX_FAULT_AB
ILITY
(RX)
RO
12
RX_FAULT_AB
ILITY
(RX)
RO
11
TX_FAULT
(RX)
RO.LH
10
RX_FAULT
(RX)
RO/LH
7
6
5
4
3
2
RESERVED
RO
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
9
RESERVED
1
8
TX_DISABLE_
ABILITY
(RX)
RO
0
Bit
15:14
Field
DEV_PRESENT
(RX)
13 TX_FAULT_ABILITY
(RX)
12 RX_FAULT_ABILITY
(RX)
11 TX_FAULT
(RX)
10 RX_FAULT
(RX)
9 RESERVED
8 TX_DISABLE_ABILITY
(RX)
7:0 RESERVED
Table 7-77. PMA_DEV_PACKAGE_2 Field Descriptions
Type
RO
Reset
RO
RO
RO/LH
RO/LH
RO
Description
Always reads 2’b10
0x = No device responding at this address
10 = Device responding at this address
11 = No device responding at this address
Always reads 1’b1.
1 = Able to detect fault condition on Tx path
0 = Not able to detect fault condition on Tx path
Always reads 1’b1.
1 = Able to detect fault condition on Rx path
0 = Not able to detect fault condition on Rx path
1 = Fault condition detected on transmit path
0 = No fault condition detected on transmit path
1 = Fault condition detected on receive path
0 = No fault condition detected on receive path
For TI use only.
Always reads 1’b0.
1 = Able to perform transmit disable function
0 = Not able to perform transmit disable function
For TI use only.
94
Detailed Description
Submit Documentation Feedback
Product Folder Links: TLK10031
Copyright © 2015, Texas Instruments Incorporated