JN517X Datasheet, PDF (9/100 Pages) NXP Semiconductors – Supports multiple network stacks

NXP Semiconductors
JN517x
IEEE802.15.4 Wireless Microcontroller
Table 2.
Symbol
DIO0
DIO1
DIO2
DIO3
V_SS
DIO4
Pin description …continued
Pin Type^[1]
Default at reset/
during boot
16 IO
DIO0 (I)
17 IO
DIO1 (I)
18 IO
DIO2 (I)
19 IO
DIO3 (I)
20 G
21 IO (open-drain)
DIO4 (I)
Default internal Description
pull-up/pull-down
pull-up
DIO0 — digital input/output 0
ADC4 — ADC input 4
SPISEL0 — SPI-bus master select
output 0
RFRX — radio receiver control output
FLICK_CTRL — flicker control output
ADO — antenna diversity odd output
pull-up
DIO1 — digital input/output 1
ADC3 — ADC input 3
RFTX — radio transmitter control input
PC0 — pulse counter 0 input
ADE — antenna diversity even output
pull-up
DIO2 — digital input/output 2
ADC5 — ADC input 5
SDA — I²C-bus master/slave SDA
input/output (push-pull output)
RXD1 — UART 1 receive data input
TIM0CAP — Timer0 capture input
RFRX — radios receiver control output
pull-down
DIO3 — digital input/output 3
ADC2 — ADC input 2
PWM4 — PWM4 output
SCL — I²C-bus master/slave SCL
input/output (push-pull output)
TXD1 — UART 1 transmit data output
TIM0OUT — Timer0 output
RFTX — radio transmit control input
FLICK_CTRL — flicker control output
pull-up
V_SS — ground
DIO4 — digital input/output 4
SCL — I²C-bus master/slave SCL
input/output (open-drain)
RXD0 — UART 0 receive data input
TIM0CK_GT — Timer0 clock/gate input
ADO — antenna diversity odd output
JN517X
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2.0 — 8 November 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
9 of 100