JN517X Datasheet, PDF(75/100 Page) NXP Semiconductors

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

JN517X Datasheet, PDF (75/100 Pages) NXP Semiconductors – Supports multiple network stacks

◁

NXP Semiconductors

JN517x

IEEE802.15.4 Wireless Microcontroller

[1] Includes absolute variation due to manufacturing and temperature.

14.3.14 Non-volatile memory

Table 33. Non-volatile memory

VDD = 2 V to 3.6 V; Tamb = ï40ï°C to +125ï°C; unless otherwise specified.

Symbol Parameter

Conditions

Nendu

endurance

Flash; program/erase

EEPROM; program/erase

ter

erase time

Flash; one sector

tprog

programming time

Flash; per page of 256 bytes

ter

erase time

EEPROM; one 64-byte page

tprog

programming time

EEPROM; between 1 byte and 64 bytes

tret

retention time

powered; Flash and EEPROM

[1] See Section 9.3.2.

[2] See Section 9.3.4.

Min

[1] 10

[2] 100

Typ Max

100 -

1000 -

100 -

1.0 -

1.8

1.1

Unit

kCycle

year

14.3.15 Radio transceiver

This JN517x meets all the requirements of the IEEE802.15.4 standard over 2.0 V to 3.6 V

and offers the improved RF characteristics shown in Table 34. All RF characteristics are

measured single ended.

This part also meets the following regulatory body approvals, when used with NXPâs

Module Reference Designs. Compliant with FCC part 15 rules, IC Canada and ETSI ETS

300-328, refer to the JN517x Module Reference Design package on the Wireless

Connectivity area of the NXP web site Ref. 2.

The PCB schematic and layout rules detailed in Section 15 must be followed. Failure to do

so will likely result in the JN517x failing to meet the performance specification detailed

herein and worst case may result in device not functioning in the end application.

Table 34. RF port characteristics

Single-ended; Impedance = 50 ï[1]; VDD = 2 V to 3.6 V; Tamb = ï40ï°C to +125ï°C; unless otherwise specified.

Symbol Parameter

Conditions

Min Typ Max

frange

frequency range

2.4 -

2.485

VESD

electrostatic discharge pin 13

voltage

HBM

CDM

500 -

Unit

GHz

[1] With external matching inductors and assuming PCB layout as inSection 15.1.1.

Table 35. Radio transceiver characteristics: +25 ï°C

VDD = 2 V to 3.6 V; unless otherwise specified.

Symbol Parameter

Conditions

Receiver

SRX

receiver sensitivity

nominal for 1 % PER, as per 802.15.4

Min Typ Max Unit

ï96 ï93.5 dBm

JN517X

Product data sheet

All information provided in this document is subject to legal disclaimers.

Rev. 2.0 â 8 November 2016

75 of 100

▷