JN517X Datasheet, PDF (2/100 Pages) NXP Semiconductors – Supports multiple network stacks

NXP Semiconductors
JN517x
IEEE802.15.4 Wireless Microcontroller
2.2 Radio features
 2.4 GHz IEEE802.15.4 compliant Ref. 1
 Receive current 14.8 mA, in low-power receive mode 12.7 mA
 Receiver sensitivity 96 dBm
 Configurable transmit power, for reduced current consumption, for example:
 10 dBm, 22.5 mA
 8.5 dBm, 19.6 mA
 3 dBm, 14 mA
 Radio link budget 106 dB
 Maximum input level of +10 dBm
 Compensation for temperature drift of crystal oscillator frequency
 2.0 V to 3.6 V battery operation
 Antenna diversity (Auto RX)
 Integrated ultra-low-power sleep oscillator (0.6 A)
 100 nA deep sleep current with wake-up from external event
 128-bit AES security processor
 MAC accelerator with packet formatting, CRCs, address check, auto-acks, timers
2.3 Microcontroller features
 ARM Cortex-M3 CPU with debug support
 JN5174: 160 kB/32 kB/4 kB (Flash/RAM/EEPROM)
 JN5178: 256 kB/32 kB/4 kB (Flash/RAM/EEPROM)
 JN5179: 512 kB/32 kB/4 kB (Flash/RAM/EEPROM)
 OTA firmware upgrade capability
 32 MHz clock selectable down to 1 MHz for low-power operation
 Dual PAN ID support
 Fail-safe I²C-bus interface. operates as either master or slave
 8 Timers (6  PWM and 2 timer/counters)
 2 low-power sleep counters
 2  UART, one with flow control
 SPI-bus master and slave port, 2 simultaneous selects
 Variable instruction width for high coding efficiency
 Multi-stage instruction pipeline
 Data EEPROM with guaranteed 100 k write operations
 Supply voltage monitor with 8 programmable thresholds
 Battery voltage and temperature sensors
 6-input 10-bit ADC
 Analog comparator
 Digital monitor for ADC
 Watchdog timer and POR
 Low-power modes controller
 Up to 18 Digital IO (DIO) and 2 digital outputs pins
JN517X
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2.0 — 8 November 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
2 of 100