JN517X Datasheet, PDF (11/100 Pages) NXP Semiconductors – Supports multiple network stacks

NXP Semiconductors
JN517x
IEEE802.15.4 Wireless Microcontroller
Table 2.
Symbol
DIO9
DIO10
V_DDD
i.c.
n.c.
V_SS
n.c.
VB_DIG
DIO11
DIO12
DIO13
V_SS
DIO14
V_SSA
Pin description …continued
Pin Type^[1]
Default at reset/
during boot
28 IO
JTAG_TDO (O)/
TXD0 (O)
29 IO
30 P
31 -
32 -
33 G
34 -
35 P; 1.8 V
36 IO
JTAG_TDI (I)/
RXD0 (I)
SWD (I)
37 IO
38 IO
DIO12 (I)
DIO13 (I)
39 G
40 IO
DIO14 (I)
-G
-
Default internal Description
pull-up/pull-down
pull-up
DIO9 — digital input/output 9
JTAG_TDO — JTAG TDO data output
TXD0 — UART 0 transmit data output
TRACESWV — ARM trace serial wire
viewer output
pull-up
DIO10 — digital input/output 10
JTAG_TDI — JTAG TDI data input
RXD0 — UART 0 receive data input
V_DDD — digital supply voltage
internally connected
not connected
V_SS — ground
not connected
VB_DIG — regulated supply voltage
pull-up
DIO11 — digital input/output 11
JTAG_TMS — JTAG TMS input
SWD — serial wire debugger input
RTS0 — UART 0 request to send output
TXD1 — UART 1 transmit data output
SPICLK — SPI-bus master clock output
SPISMOSI — SPI-bus slave data input
TIM1OUT — Timer1 output
TRACED0 — ARM trace data0 output
pull-down
DIO12 — digital input/output 12
PWM1 — PWM1 output
TXD0 — UART 0 transmit data output
TRACED3 — ARM trace data3 output
pull-down
DIO13 — digital input/output 13
PWM2 — PWM2 output
RXD0 — UART 0 receive data input
PC0 — pulse counter 0 input
TRACED2 — ARM trace data2 output
pull-down
V_SS — ground
DIO14 — digital input/output 14
PWM3 — PWM3 output
PC1 — pulse counter 1 input
CMP_OUT — comparator output
TRACED1 — ARM trace data1 output
SPISMOSI — SPI-bus slave data input
-
V_SSA — Exposed die paddle
JN517X
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2.0 — 8 November 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
11 of 100