JN517X Datasheet, PDF (8/100 Pages) NXP Semiconductors – Supports multiple network stacks

NXP Semiconductors
JN517x
IEEE802.15.4 Wireless Microcontroller
8.2 Pin description
Table 2. Pin description
Symbol
Pin Type^[1]
DIO15
1 IO
DIO17
2 IO
DIO18
3 IO
RESET_N 4 I
XTAL_OUT 5 O
XTAL_IN 6 I
VB_SYNTH 7 P
VB_VCO 8 P
V_DDA
IBIAS
9P
10 I
VREF/ADC1 11 I
VB_RF2
RF_IO
VB_RF1
ADC0
12 P; 1.8 V
13 IO
14 P; 1.8 V
15 I
Default at reset/ Default internal Description
during boot
pull-up/pull-down
DIO15 (I)
pull-down
DIO15 — digital input/output 15
PWM6 — PWM6 output
JTAG_TDO — JTAG TDO data output
SPIMOSI — SPI-bus master data output
SPISEL1 — SPI-bus master select output
1
TIM0CK_GT — Timer0 - clock gate input
TRACESWV — ARM trace Serial Wire
Viewer output
SPISSEL — SPI-bus slave select input
at reset: DIO17 (I); pull-up
during boot:
SWCK (I)
DIO17 — digital input/output 17
JTAG_TCK — JTAG TCK input
SWCK — Serial Wire Debugger Clock
input
SPISEL0 — SPI-bus master select output
0
TIM1CAP — Timer1 capture input
COMP1P — comparator plus input
SPISMISO — SPI-bus slave data output
DIO18 (I)
pull-up
DIO18 — digital input/output 18
JTAG_TMS — JTAG TMS input
SWD — Serial Wire Debugger input
SPIMISO — SPI-bus master data input
TIM1OUT — Timer1 output
COMP1M — comparator minus input
SPISCLK — SPI-bus slave clock input
pull-up
RESET_N — reset input
pull-up
XTAL_OUT — system crystal oscillator
pull-up
XTAL_IN — system crystal oscillator
VB_SYNTH — regulated supply voltage
VB_VCO — regulated supply voltage
V_DDA — analog supply voltage
IBIAS — bias current control
VREF — analog peripheral reference
voltage
ADC1 — ADC input 1
VB_RF2 — regulated supply voltage
RF_IO — RF antenna
VB_RF1 — regulated supply voltage
ADC0 — ADC input 0
JN517X
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2.0 — 8 November 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
8 of 100