JN517X Datasheet, PDF (10/100 Pages) NXP Semiconductors – Supports multiple network stacks

NXP Semiconductors
JN517x
IEEE802.15.4 Wireless Microcontroller
Table 2.
Symbol
DIO5
DO0^[2]
DO1^[3]
DIO6^[4]
DIO7^[5]
DIO8
Pin description …continued
Pin Type^[1]
Default at reset/
during boot
22 IO (open-drain) DIO5 (I)
23 O
24 IO
25 IO
SPICLK (O)
SPIMISO (I)
SPISEL0 (O)
26 IO
SPIMOSI (O)
27 IO
DIO8 (I)
Default internal Description
pull-up/pull-down
pull-up
DIO5 — digital input/output 5
SDA — I²C-bus master/slave SDA
input/output (open-drain)
TXD0 — UART 0 transmit data output
PC1 — pulse counter 1 input
TIM0CAP — Timer0 capture input
ADE — antenna diversity even output
pull-up
DO0 — digital output 0
SPICLK — SPI-bus master clock output
ADE — antenna diversity even output
pull-up
DO1 — digital output 1
SPIMISO — SPI-bus master data input
SPISMISO — SPI-bus slave data output
ADO — antenna diversity odd output
pull-up
DIO6 — digital input/output 6
SPISEL0 — SPI-bus master select output
0
CTS0 — UART 0 clear to send input
RXD1 — UART 1 receive data input
JTAG_TCK — JTAG TCK input
SWCK — Serial Wire Debugger Clock
input
SPISCLK — SPI-bus slave clock input
TIM1CAP — Timer1 capture input
pull-down
DIO7 — digital input/output 7
SPIMOSI — SPI-bus master data output
JTAG_TDI — JTAG TDI data input
SPISEL2 — SPI-bus master select output
2
SPISSEL — SPI-bus slave select input
CMP_OUT — comparator output
32KIN — 32 kHz External clock input
32KXTALOUT — 32 kHz clock output
pull-down
DIO8 — digital input/output 8
PWM5 — PWM5 output
TIM0OUT — Timer0 output
TRACECLK — trace clock output
32KXTALIN — 32 kHz clock input
JN517X
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 2.0 — 8 November 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
10 of 100