MC68HC08AS32 Datasheet, PDF (213/394 Pages) Motorola, Inc – M68HC08 Family of 8-bit microcontroller units (MCUs)

Timer Interface (TIM)
Functional Description
registers to synchronously control the output after the TIM overflows. At
each subsequent overflow, the TIM channel registers (4 or 5) that control
the output are the ones written to last. TSC4 controls and monitors the
buffered output compare function, and TIM channel 5 status and control
register (TSC5) is unused. While the MS4B bit is set, the channel 5 pin,
PTF3/TCH5, is available as a general-purpose I/O pin.
NOTE:
In buffered output compare operation, do not write new output compare
values to the currently active channel registers. Writing to the active
channel registers is the same as generating unbuffered output
compares.
16.4.4 Pulse Width Modulation (PWM)
By using the toggle-on-overflow feature with an output compare
channel, the TIM can generate a PWM signal. The value in the TIM
counter modulo registers determines the period of the PWM signal. The
channel pin toggles when the counter reaches the value in the TIM
counter modulo registers. The time between overflows is the period of
the PWM signal.
As Figure 16-2 shows, the output compare value in the TIM channel
registers determines the pulse width of the PWM signal. The time
between overflow and output compare is the pulse width. Program the
TIM to clear the channel pin on output compare if the state of the PWM
pulse is logic 1. Program the TIM to set the pin if the state of the PWM
pulse is logic 0.
OVERFLOW
OVERFLOW
OVERFLOW
PERIOD
PTEx/TCHx
MC68HC08AS32 — Rev. 3.0
MOTOROLA
PULSE
WIDTH
OUTPUT
COMPARE
OUTPUT
COMPARE
Figure 16-2. PWM Period and Pulse Width
OUTPUT
COMPARE
Timer Interface (TIM)
Advance Information
213