MC68HC08AS32 Datasheet, PDF (128/394 Pages) Motorola, Inc – M68HC08 Family of 8-bit microcontroller units (MCUs)

System Integration Module (SIM)
9.4.2 Active Resets from Internal Sources
All internal reset sources actively pull the RST pin low for 32 CGMXCLK
cycles to allow resetting of external peripherals. The internal reset signal
IRST continues to be asserted for an additional 32 cycles.
See Figure 9-4. An internal reset can be caused by an illegal address,
illegal opcode, COP timeout, LVI, or POR. (See Figure 9-5. Sources of
Internal Reset.) Note that for LVI or POR resets, the SIM cycles through
4096 CGMXCLK cycles during which the SIM forces the RST pin low.
The internal reset signal then follows the sequence from the falling edge
of RST shown in Figure 9-4.
The COP reset is asynchronous to the bus clock.
The active reset feature allows the part to issue a reset to peripherals
and other chips within a system built around the MCU.
IRST
RST
CGMXCLK
IAB
RST PULLED LOW BY MCU
32 CYCLES
32 CYCLES
VECTOR HIGH
Figure 9-4. Internal Reset Timing
ILLEGAL ADDRESS RST
ILLEGAL OPCODE RST
COPRST
LVI
POR
INTERNAL RESET
Figure 9-5. Sources of Internal Reset
Advance Information
128
System Integration Module (SIM)
MC68HC08AS32 — Rev. 3.0
MOTOROLA