PIC18F45K80-I Datasheet, PDF(358/622 Page) Microchip Technology – 28/40/44/64-Pin, Enhanced Flash Microcontrollers with ECAN and nanoWatt XLP Technology

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

PIC18F45K80-I Datasheet, PDF (358/622 Pages) Microchip Technology – 28/40/44/64-Pin, Enhanced Flash Microcontrollers with ECAN and nanoWatt XLP Technology

◁

PIC18F66K80 FAMILY

23.2 A/D Registers

23.2.1 A/D CONTROL REGISTERS

REGISTER 23-1: ADCON0: A/D CONTROL REGISTER 0

U-0

â

bit 7

R/W-0

CHS4

R/W-0

CHS3

R/W-0

CHS2

R/W-0

CHS1

R/W-0

CHS0

R/W-0

GO/DONE

R/W-0

ADON

bit 0

Legend:

R = Readable bit

-n = Value at POR

W = Writable bit

â1â = Bit is set

U = Unimplemented bit, read as â0â

â0â = Bit is cleared

x = Bit is unknown

bit 7

bit 6-2

bit 1

bit 0

Unimplemented: Read as â0â

CHS<4:0>: Analog Channel Select bits

00000 = Channel 00 (AN0)

00001 = Channel 01 (AN1)

00010 = Channel 02 (AN2)

00011 = Channel 03 (AN3)

00100 = Channel 04 (AN4)

00101 = Channel 05 (AN5)(1,2)

00110 = Channel 06 (AN6)(1,2)

00111 = Channel 07 (AN7)(1,2)

01000 = Channel 08 (AN8)

01001 = Channel 09 (AN9)

01010 = Channel 10 (AN10)

01011 = (Reserved)(2)

01100 = (Reserved)(2))

01101 = (Reserved)(2))

01110 = (Reserved)(2))

01111 = (Reserved)(2)

10000 = (Reserved)(2)

10001 = (Reserved)(2)

10010 = (Reserved)(2)

10011 = (Reserved)(2)

10100 = (Reserved)(2)

10101 = (Reserved)(2)

10110 = (Reserved)(2)

10111 = (Reserved)(2)

11000 = (Reserved)(2)

11001 = (Reserved)(2)

11010 = (Reserved)(2)

11011 = (Reserved)(2)

11100 = (MUX disconnect)(3)

11101 = Channel 29 (temperature diode)

11110 = Channel 30 (VDDCORE)

11111 = Channel 31 (1.024V band gap)

GO/DONE: A/D Conversion Status bit

1 = A/D cycle is in progress. Setting this bit starts an A/D conversion cycle. The bit is cleared

automatically by hardware when the A/D conversion is completed.

0 = A/D conversion has completed or is not in progress

ADON: A/D On bit

1 = A/D Converter is operating

0 = A/D conversion module is shut off and consuming no operating current

Note 1:

2:

3:

These channels are not implemented on 28-pin devices.

Performing a conversion on unimplemented channels will return random values.

Channel 28 turns off analog MUX switches to allow for minimum capacitive loading of the A/D input, for

finer resolution CTMU time measurements.

DS39977F-page 358

ï£ 2010-2012 Microchip Technology Inc.

▷