|
HD6473032F Datasheet, PDF (72/572 Pages) Hitachi Semiconductor – Hitachi Microcomputer | |||
|
◁ |
3.2 Mode Control Register (MDCR)
MDCR is an 8-bit read-only register that indicates the current operating mode of the H8/3032
Series.
Bit
7
6
5
4
3
2
1
0
â
â
â
â
â
â
MDS1 MDS0
Initial value
1
1
0
0
0
1
â*
â*
Read/Write
â
â
â
â
â
â
R
R
Reserved bits
Note: * Determined by pins MD1 and MD0.
Mode select 1 and 0
Bits indicating the current
operating mode
Bits 7 and 6âReserved: Read-only bits, always read as 1.
Bits 5 to 3âReserved: Read-only bits, always read as 0.
Bit 2âReserved: Read-only bit, always read as 1.
Bits 1 and 0âMode Select 1 and 0 (MDS1 and MDS0): These bits indicate the logic levels at
pins MD1 and MD0 (the current operating mode). MDS1 and MDS0 correspond to MD1 and
MD0. MDS1 and MDS0 are read-only bits. The mode pin (MD1 and MD0) levels are latched
when MDCR is read.
57
|
▷ |