English
Language : 

MC68HC908LB8_05 Datasheet, PDF (84/234 Pages) Freescale Semiconductor, Inc – M68HC08 Microcontrollers
External Interrupt (IRQ)
• Controls triggering sensitivity of the IRQ interrupt pin
Address:
Read:
Write:
Reset:
$001D
Bit 7
6
5
0
0
0
= Unimplemented
4
3
2
1
IRQF
0
IMASK
ACK
0
0
0
0
Figure 8-3. IRQ Status and Control Register (INTSCR)
Bit 0
MODE
0
IRQF — IRQ Flag Bit
This read-only status bit is high when the IRQ interrupt is pending.
1 = IRQ interrupt pending
0 = IRQ interrupt not pending
ACK — IRQ Interrupt Request Acknowledge Bit
Writing a 1 to this write-only bit clears the IRQ latch. ACK always reads as 0. Reset clears ACK.
IMASK — IRQ Interrupt Mask Bit
Writing a 1 to this read/write bit disables IRQ interrupt requests. Reset clears IMASK.
1 = IRQ interrupt requests disabled
0 = IRQ interrupt requests enabled
MODE — IRQ Edge/Level Select Bit
This read/write bit controls the triggering sensitivity of the IRQ pin. Reset clears MODE.
1 = IRQ interrupt requests on falling edges and low levels
0 = IRQ interrupt requests on falling edges only
MC68HC908LB8 Data Sheet, Rev. 1
84
Freescale Semiconductor