MC68HC05V12 Datasheet, PDF (159/246 Pages) Freescale Semiconductor, Inc – HCMOS Microcontreller Unit

Freescale Semiconductor, Inc.
Byte Data Link Controller – Digital (BDLC–D)
BDLC Protocol Handler
14.6.5.1 4X Mode
The BDLC can exist on the same J1850 bus as modules which use a
special 4X (41.6 kbps) mode of J1850 variable pulse width modulation
(VPW) operation. The BDLC cannot transmit in 4X mode, but it can
receive messages in 4X mode, if the RX4XE bit is set in BCR2. If the
RX4XE bit is not set in the BCR2, any 4X message on the J1850 bus is
treated as noise by the BDLC and is ignored.
14.6.5.2 Receiving a Message in Block Mode
Although not a part of the SAE J1850 protocol, the BDLC does allow for
a special block mode of operation of the receiver. As far as the BDLC is
concerned, a block mode message is simply a long J1850 frame that
contains an indefinite number of data bytes. All other features of the
frame remain the same, including the SOF, CRC, and EOD symbols.
Another node wishing to send a block mode transmission must first
inform all other nodes on the network that this is about to happen. This
is usually accomplished by sending a special predefined message.
14.6.5.3 Transmitting a Message in Block Mode
A block mode message is transmitted inherently by simply loading the
bytes one by one into the BDR until the message is complete. The
programmer should wait until the TDRE flag (see 14.7.4 BDLC State
Vector Register) is set prior to writing a new byte of data into the BDR.
The BDLC does not contain any predefined maximum J1850 message
length requirement.
14.6.5.4 J1850 Bus Errors
The BDLC detects several types of transmit and receive errors which
can occur during the transmission of a message onto the J1850 bus.
Transmission Error
If the message transmitted by the BDLC contains invalid bits or
framing symbols on non-byte boundaries, this constitutes a
transmission error. When a transmission error is detected, the BDLC
MC68HC05V12 — Rev. 2.0
Byte Data Link Controller – Digital (BDLC–D)
For More Information On This Product,
Go to: www.freescale.com
Technical Data