Z51F0410 Datasheet, PDF (168/184 Pages) Zilog, Inc. – Z8051 Series 8-Bit Microcontrollers

Z51F0410
Product Specification
Step 9. Insert one NOP operation
Step 9. Read FESR until PEVBSY is 1.
8.4.1.6 Flash OTP area read mode
Step 1. Enter OCD(=ISP) mode.
Step 2. Set ENBDM bit of BCR.
Step 3. Enable debug and Request debug mode.
Step 4. Select OTP area. FEMR:1000_0101
Step 5. Read data from Flash.
8.4.1.7 Flash OTP area write mode
Step 1. Enable program mode.
Step 2. Reset page buffer. FEMR: 1000_0001 FECR:0000_0010
Step 3. Select page buffer. FEMR:1000_1001
Step 4. Write data to page buffer.(Address automatically increases by twin.)
Step 5. Set write mode and select OTP area. FEMR:1010_0101
Step 6. Set page address. FEARH:FEARM:FEARL=20’hx_xxxx
Step 7. Set FETCR.
Step 8. Start program. FECR:0000_1011
Step 9. Insert one NOP operation
Step 10. Read FESR until PEVBSY is 1.
8.4.1.8 Flash OTP area erase mode
Step 1. Enable program mode.
Step 2. Reset page buffer. FEMR: 1000_0001 FECR:0000_0010
Step 3. Select page buffer. FEMR:1000_1001
Step 4. Write ‘h00 to page buffer. (Data value is not important.)
Step 5. Set erase mode and select OTP area. FEMR:1001_0101
Step 6. Set page address. FEARH:FEARM:FEARL=20’hx_xxxx
Step 7. Set FETCR.
Step 8. Start erase. FECR:0000_1011
Step 9. Insert one NOP operation
Step 10. Read FESR until PEVBSY is 1.
8.4.1.9 Flash program verify mode
Step 1. Enable program mode.
Step 2. Set program verify mode. FEMR:1010_0011
Step 3. Read data from Flash.
PS029502-0212
PRELIMINARY
165