HD64F3337YCP16V Datasheet, PDF (358/749 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

14.3 Operation
14.3.1 Host Interface Operation
The host interface is activated by setting the HIE bit (bit 1) to 1 in SYSCR, establishing slave
mode. Activation of the host interface (entry to slave mode) appropriates the related I/O lines in
port 3 or B (data), port 8 or 9 (control) and port 4 (host interrupt requests) for interface use.
For host interface read/write timing diagrams, see section 23.3.8, Host Interface Timing.
14.3.2 Control States
Table 14.5 indicates the slave operations carried out in response to host interface signals from the
host processor.
Table 14.5 Host Interface Operation
CS₂
CS₁
IOR
IOW HA₀
1
0
0
0
0
1
1
0
1
1
0
0
1
1
0
1
0
1
0
0
0
1
1
0
1
1
0
0
1
1
0
1
Slave Operation
Prohibited
Prohibited
Data read from output data register 1 (ODR1)
Status read from status register 1 (STR1)
Data write to input data register 1 (IDR1)
Command write to input data register 1 (IDR1)
Idle state
Idle state
Prohibited
Prohibited
Data read from output data register 2 (ODR2)
Status read from status register 2 (STR2)
Data write to input data register 2 (IDR2)
Command write to input data register 2 (IDR2)
Idle state
Idle state
326