HD64F3337YCP16V Datasheet, PDF (235/749 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

9.3.2 Compare-Match Timing
Setting of Compare-Match Flags A and B (CMFA and CMFB): The compare-match flags are
set to 1 by an internal compare-match signal generated when the timer count matches the time
constant in TCORA or TCORB. The compare-match signal is generated at the last state in which
the match is true, just before the timer counter increments to a new value.
Accordingly, when the timer count matches one of the time constants, the compare-match signal is
not generated until the next period of the clock source. Figure 9.4 shows the timing of the setting
of the compare-match flags.
ø
TCNT
N
N+1
TCOR
N
Internal compare-
match signal
CMF
Figure 9.4 Setting of Compare-Match Flags
203