HD64F3337YCP16V Datasheet, PDF (265/749 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

Section 12 Serial Communication Interface
12.1 Overview
The H8/3337 Series and H8/3397 Series include two serial communication interface channels
(SCI0 and SCI1) for transferring serial data to and from other chips. Either synchronous or
asynchronous communication can be selected.
12.1.1 Features
The features of the on-chip serial communication interface are:
• Asynchronous mode
The H8/3337 Series and H8/3397 Series can communicate with a UART (Universal
Asynchronous Receiver/Transmitter), ACIA (Asynchronous Communication Interface
Adapter), or other chip that employs standard asynchronous serial communication. It also has a
multiprocessor communication function for communication with other processors. Twelve data
formats are available.
 Data length: 7 or 8 bits
 Stop bit length: 1 or 2 bits
 Parity: Even, odd, or none
 Multiprocessor bit: 1 or 0
 Error detection: Parity, overrun, and framing errors
 Break detection: When a framing error occurs, the break condition can be detected by
reading the level of the RxD line directly.
• Synchronous mode
The SCI can communicate with chips able to perform clocked synchronous data transfer.
 Data length: 8 bits
 Error detection: Overrun errors
• Full duplex communication
The transmitting and receiving sections are independent, so each channel can transmit and
receive simultaneously. Both the transmit and receive sections use double buffering, so
continuous data transfer is possible in either direction.
• Built-in baud rate generator
Any specified bit rate can be generated.
• Internal or external clock source
The SCI can operate on an internal clock signal from the baud rate generator, or an external
clock signal input at the SCK0 or SCK1 pin.
233