HD64F3337YCP16V Datasheet, PDF (262/749 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

11.3.2 Interval Timer Mode
Interval timer operation begins when the WT/IT bit is cleared to 0 and the TME bit is set to 1.
In interval timer mode, an WOVF request is generated each time the timer count overflows. This
function can be used to generate WOVF requests at regular intervals. See figure 11.4.
H'FF
TCNT count
H'00
Time t
WT/IT = 0 WOVF WOVF WOVF WOVF WOVF
TME = 1 request request request request request
Figure 11.4 Operation in Interval Timer Mode
11.3.3 Setting the Overflow Flag
The OVF bit is set to 1 when the timer count overflows. Simultaneously, the WDT module
requests an internal reset, NMI, or WOVF interrupt. The timing is shown in figure 11.5.
ø
TCNT
Internal overflow
signal
H'FF H'00
OVF
Figure 11.5 Setting the OVF Bit
230